FAST HI-6S Multi-Spark Ignition

FAST's HI-6S Multi-Spark Ignition is manufactured with a powerful inductive design for street and race performance. It has a Plug-n-Go installation for 4/6/8-cylinder applications. The HI-6S delivers up to 70% more spark-gap energy than stock ignitions and is suitable for up to 9.5:1 compression ratios with a max output up to 8,000 RPM. A new soft urethane encapsulation ensures a tight seal against moisture, dirt, dust, vibration, and heat. It can be triggered by points or module distributors and has a built-in rev limiter that's adjustable in 100 RPM increments from 3,100-9,900 RPM.

Features:

Inductive ignition with long duration spark
Boost retard or 20° selectable nitrous retard
Rev limiter adjusted in 100 RPM increments
70% more spark-gap energy
50-State Legal CARB EO #225-59

Specifications:

Operating Voltage: 6 to 18 Volts, Reverse Polarity protected, negative ground only
Current Draw: 5.0 Amps max @ 7,000 RPM
RPM Operating Range: 8,000 RPM (Can be extended to 10,000 RPM on 4 cyl. engine)
RPM Limiter Range: 3,100 to 9,900 RPM when digital stage rev limiter mode is selected
Multiple Spark Duration: 20° crank rotation below 2,000 RPM, Max 12 sparks per sequence
Primary Voltage Output: 450 Volts
Spark Duration: 2,800 microseconds at 2,000 RPM
Trigger Input: Module Trigger (12v square wave)
Dimensions: 5-1/2'' x 3'' x 1-1/2'', 2-3/8 lbs

FAST HI-6S Multi-Spark Ignition

HI-6S Ignition System

FAST HI-6S Multi-Spark Ignition System 4/6/8-Cylinder Applications

FAST HI-6S Multi-Spark Ignition System 4/6/8-Cylinder Applications

Harnesses

FAST Ignition System Adapter Harness Six-Pin Ignition and Coil

FAST Ignition System Adapter Harness Six-Pin Ignition and Coil