Innovate Motorsports ST-12 Engine Data Acquisition System
The ST-12 is designed for engine builders, tuners, and racers. At its simplest, the ST-12 can add wideband Air/Fuel measurement to existing dynos, allowing users to either feed the ST-12's outputs into their dyno, or to feed the dyno's outputs into the ST-12.
For RPM, the ST-12 includes options for direct tach input, inductive clamp, GMR sensor, or optical sensors. For Manifold Absolute Pressure, the ST-12 features a configurable 1-bar, or 3-bar pressure sensor for both normally-aspirated and forced-induction applications. Multiple temperature and duty-cycle channels round out the auxiliary-input capabilities of the ST-12.
Every ST-12 system includes the powerful LogWorks software for viewing, analyzing, comparing, and saving session data. With LogWorks, users can view and print everything from standard Dyno chart to 3D color graphs with transparent overlays. LogWorks features 32 channels of data, sampled at 12 samples/second.
A key feature of LogWorks 2.0 is a full math engine for generating calculated traces. For example, LogWorks can calculate and graph horsepower, allowing direct mapping and comparison of HP vs. RPM vs. AFR. This enables users to gather performance data with a number of different fuel maps (or jetting changes, etc.), then use LogWorks to directly determine peak volumetric efficiency at any RPM or load. In other works, LogWorks 2.0 can tell you not only what your AFRs are, but also what they should be.
A standard setup might include 8 channels of Air/Fuel Ratio, plus RPM, MAP, CHT, Dwell, and TPS. With this setup, a user can log AFR from every cylinder of an 8-cylinder engine. Tests have shown as much as 4 AFR points of variation from cylinder to cylinder.
For example, an engine that shows 13.1 AFR at the collector might have cylinders anywhere from 11.1 to 15.1. A rich cylinder (11.5 AFR) is wasting fuel, loosing horsepower, and fouling plugs, while a lean cylinder (15.5 AFR) is loosing horsepower, detonating, and dangerously close to damaging valve, pistons, and cylinders. In this example, after balancing the cylinders, the engine gained more torque, more efficiency, and will almost certainly last longer, and all the while the average stays at 13.1 AFR.
Innovate Motorsports ST-12 Data Acquisition System
ST-12 Data Acquisition System