FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

JEGS Low Volume Drag Race Oil Pumps


JEGS Performance Products
JEGS Low Volume Drag Race Oil Pumps

Product images may differ from actual product appearance.

Professional engine builder horsepower on a bracket racers budget!

For years top engine builders and drag racers have been modifying stock oil pumps to make the extra horsepower needed to gain an edge on the competition. They would spend upwards of $500.00 for these modified oil pumps. We have developed an oil pump that has these features and more at fraction of the cost. These pumps feature Exclusive Full Flow directional lubrication of idler shaft and gear driven shaft, anti-aeration bleed off of oil supply and a correctly pre-positioned 40 P.S.I. relief valve. Not to mention a 15-20 horsepower gain!

NOTE: These pumps are intended for drag race applications only. Not to be used in street or circle track applications.

    Low Volume Drag Race Small Block Chevy Oil Pump

  • Exclusive Full Flow directional lubrication of idler shaft and gear driven shaft.
  • Anti-Aeration bleed off of oil supply.
  • High strength Iron alloy casting that uses a casting technique that eliminates 80% of all porosity (70,000 PSI). Most other pumps use a more porous 35,000 PSI design.
  • Mounting bolt neck to housing is 150 grams heavier than most typical pumps - The strongest in the industry!
  • Precision machined for tighter tolerances - this means less pressure loss!
  • No more bleed off problems at idle. Exact mesh gear set to housing bore yields the highest idle PSI.
  • Drilled cap screw for easy cleaning and oil pressure spring change. No more retainer pins to try and knock in and out to change the oil pressure spring.
  • Correct pre-position 40 PSI relief valve.
  • Two extra long bolts attaching the base plate accommodate aftermarket performance bolt-on screen assemblies.
  • Uses standard 5/8" pick-up tube.
  • Gears are 1.000" tall (standard is 1.200") and v-notch staggered.
  • Cover plate features an anti-cavitation relief groove.
  • Dual port bypass relief.

    Low Volume Drag Race Small Block Ford Oil Pump

  • Exclusive Full Flow directional lubrication of idler shaft and gear driven shaft. This pump also fully lubricates the oil ring rotor OD and the housing ID.
  • Anti-Aeration bleed off of oil supply.
  • High strength iron alloy casting.
  • Precision machined for tighter tolerances - this means less oil pressure loss!
  • No more bleed off problems at idle. Exact mesh gear set to housing bore yields the highest idle PSI
  • Heat Treated Cover Plate - Prevents the gear from wearing into the cover plate to give you unsurpassed consistency and reliability.
  • Correct Pre-Position 40 P.S.I. Relief Valve.
  • Uses standard 0.630" pick-up tube.
  • Relief Groove Pressure Balanced Gerotor Assembly. Gear Pressure Balancing eliminates gear and rotor pressure locking and hydraulic out of balance. This is the only pump in the industry with this feature!
  • Gears are 0.660" tall. Standard gears are 0.875" tall.


1 Product

555-23505
LVDR Oil Pump
  • Small Block Chevy
  • $203.99
    Ships

    1 Product