New tricks for your old dog!Replace your stock, flexible rear suspension control
arms and rubber bushings with stiff .120'' wall
tubular units and polyurethane bushings. Or choose adjustable control arms with rod
ends and solid metal bushings with grease fittings.
1964-72 A-Body Bolt-On Rear Lower Control Arms - P/N 550-40082
- Center to center length is 22''.
- Urethane bushings for both ends of 2 arms are included.
- Sway bar mounts are included.
- Control arm body is 1-3/4'' steel tubing.
- A replacement bushing set for both ends of 2 arms is P/N 550-40803.
1964-72 A-Body Adjustable Bolt-On Rear Lower Control Arms - P/N 550-40083
- Center to center length is 21.625'' to 22.375''.
- Sway bar mounts are included.
- Rod ends, spacers and reducer bushings are included for the front.
- Steel bushings with grease fittings are included for the rear.
- Control arm body is 1-3/4'' steel tubing.
- A replacement rod end for the front is P/N 122-CMR12 or 724-MSM12.
1964-67 A-Body Bolt-On Rear Upper Control Arms - P/N 550-40084
- Center to center length is 12.750''.
- Urethane bushings for the front of the arm are included.
- The rear of the arm use the stock or a replacement bushing in the housing eyes.
- Control arm body is 1-1/2'' steel tubing.
- A replacement bushing set for the front of 2 arms is P/N 550-40801.
- May retain stock housing bushings or replace with urethane replacement bushings P/N: 555-60525
1964-67 A-Body Adjustable Bolt-On Rear Upper Control Arms - P/N 550-40085
- Center to center length is 12.375'' to 13.125''.
- Rod ends, spacers and reducer bushings are included for the front.
- The rear of the arm uses the stock or a replacement bushing in the housing eyes.
- Control arm body is 1-1/2'' steel tubing.
- A replacement rod end for the front is P/N 122-CMR12 or 724-MSM12.
- May retain stock housing bushings or replace with urethane replacement bushings P/N: 555-60525
1968-72 A-Body Bolt-On Rear Upper Control Arms - P/N 550-40086
- Center to center length is 10.250''.
- Urethane bushings for the front of the arm are included.
- The rear of the arm use the stock or a replacement bushing in the housing eyes.
- Control arm body is 1-1/2'' steel tubing.
- A replacement bushing set for the front of 2 arms is P/N 550-40801.
- May retain stock housing bushings or replace with urethane replacement bushings P/N: 555-60525
1968-72 A-Body Adjustable Bolt-On Rear Upper Control Arms - P/N 550-40087
- Center to center length is 9.500'' to 10.250''.
- Rod ends, spacers and reducer bushings are included for the front.
- The rear of the arm use the stock or a replacement bushing in the housing eyes.
- Control arm body is 1-1/2'' steel tubing.
- A replacement rod end for the front is P/N 122-CMR or 724-MSM12.
- May retain stock housing bushings or replace with urethane replacement bushings P/N: 555-60525
