FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Jiffy-tite 3000 Series Quick Connect Fittings

Jiffy-tite 3000 Series Quick Connect Fittings

Product images may differ from actual product appearance.

Jiffy-tite's 3000 Series fittings are available in -06AN to -08AN in numerous adapter styles as well as 1/4'' and 3/8'' NPT are available in male and female. Fittings come standard with valved FKM Fluorocarbon seals that provide minimal flow restriction and are compatible with most oil, water, fuel, or transmission applications.

3000 Series fittings are also available for alcohol applications in valved and non-valved Buna N (Nitrile) seals. For Methanol and Nitromethane applications, EPDM seals are recommended.

Changeovers and removals are a breeze with the Jiffy-tite quick connect fittings. By connecting and disconnecting in seconds without any tools and no clean up you can reduce your time substantially.

  • 100% Leak Tested
  • Replaces Any Fitting in Any Location
  • Available for ALL Fuel, Oil, and Water Applications
  • Will not wear out
  • Avoids stripping, cross-threading and over-tightening
  • Maximum Operating Pressure: 200 PSI
  • Operating Temperature: -40° to 350° F; -40° to 177° C
  • Works with most steel-braided, lightweight black and push-to-lock hose styles except Teflon
  • FKM Fluorocarbon for Pump Gas, Race Gas, and E85 applications
  • Buna N (Nitrile) seals for Alcohol applications
  • EPDM seals for Methanol and Nitromethane applications
  • Jiffy-tite fittings permit fluid to flow in both directions


  • Fittings should not be used on brake lines.
  • Push Lock Hose End Fittings uses "Push Loc" Style Hose
  • Hose Barb fittings uses standard braided hose but requires a clamp or crimp collar

    Fitting Selection Guide

  • 2 Products
    Jiffy-tite MS3000C -
    3000 Series Dust Cap
    Jiffy-tite MS3000P -
    3000 Series Dust Plug

    2 Products