Jiffy-tite's 3000 Series fittings are available in -06AN to -08AN in numerous adapter styles as well as 1/4'' and 3/8'' NPT are available in male and female. Valved quick connect fittings provide minimal flow restriction. Different seal types offer compatibility for all oil, water, fuel, or transmission fluid applications.
Changeovers and removals are a breeze with the Jiffy-tite valved quick connect fittings. By connecting and disconnecting in seconds without any tools or fluid mess you can reduce your time substantially.
Jiffy-tite 3000 Series Quick Connect Fittings are also available Non-Valved
FKM Fluorocarbon for Oil, Water, Transmission Fluid, Pump Gas, Race Gas, E85 and Diesel applications
EPDM seals for Methanol (Methyl Alcohol), Ethanol (Ethyl Alcohol) and Nitromethane applications Click here for Valved EPDM Fittings
100% Leak Tested
Replaces Any Fitting in Any Location
Available for virtually all Fuel, Oil, and Water Applications
Will not wear out
Avoids stripping, cross-threading, and over-tightening
Any 3000 series plug will work with any 3000 series socket
Maximum Operating Pressure: 200 psi
Operating Temperature: -40° to 350° F; -40° to 177° C
Works with most steel-braided, lightweight black, and push-to-lock hose styles except Teflon
Jiffy-tite fittings permit fluid to flow in both directions
Fittings should not be used on brake lines.
Push Lock Hose End Fittings uses "Push Loc" Style Hose
Hose Barb fittings uses standard braided hose but requires a clamp or crimp collar
Fitting Selection Guide