Lizard Skin Insulation and Accessories


Lizard Skin
Lizard Skin Insulation and Accessories

Product images may differ from actual product appearance.





Ceramic Insulation
A premium spray-on insulation for all cars and trucks, street rods and customs, race cars, buses, refrigerated trailers, RVs, motorhomes, experimental aircraft, and high end audio installations---wherever heat and noise are a problem

LizardSkin Ceramic Insulation formula is an advanced, water-based composition of high-grade acrylic binders with air-filled insulating/reflective and sound-absorbing particles.

  • Environmentally friendly, water-based
  • Class A fire-rated
  • No respirator needed; dust mask/protective eyewear recommended
  • Spray application only; brush for small areas or touch up
  • Can cover hard to reach places like inner door panels
  • Cleans up with soap & water
  • Each 2-gallon container covers 46-50 sq. feet @ .040"

    Proven aerospace technology enables LizardSkin® Ceramic Insulation to:
  • Reduce engine and solar heat transfer by 25-30 degrees or more
  • Protect surfaces from moisture and corrosion
  • Withstand temperatures to 500° F. (260° C.)

    LizardSkin SC
    LizardSkin SC formula is an advanced, water-based composition of high-grade acrylic binders with sound-damping particles. Proven sound damping technology enables LizardSkin SC to dramatically reduce noise when properly applied. It also protects surfaces from moisture and corrosion and can withstand temperatures to 300° F. (149° C.)

    LizardSkin SC is used by custom car, street rod, truck builders and RV owners who want to reduce unwanted noise and/or enhance the sound of their high end audio systems. It is best applied by special spray applicator to a clean and dry primed or painted rust-free steel. Typical applications include firewalls, floor pans, transmission tunnels, doors, hoods, trunk lids, under headliners, inside fenders, panel van walls and other areas that generate vibration and noise. For maximum acoustic performance, coat entire interior surface and the floor inside and out.

  • Dramatically reduces noise and vibration
  • Protect surfaces from moisture and corrosion
  • Withstand temperatures to 300° F. (149ª C.)
  • Class A Fire-rated
  • A 2- gallon container covers approximately 100 sq. ft. at 20/1000's (Max thickness 40/1000's for maximum effectiveness)

    SuperPro Spray Applicator Kit
    The SuperPro Spray Application kit provides exactly what's needed for professionals and hobbyists to properly apply amazing LizardSkin coatings Typical spray guns used for paint application are simply not engineered to handle the higher density of these high technology coatings. To help facilitate this process for builders and manufacturers, LizardSkin LLC is pleased to offer the proven quality of the SuperPro Spray Applicator.

  • Professional quality spray gun designed to handle the high density and viscosity of LizardSkin Ceramic Insulation and LizardSkin SC - Sound Control Formula with extra nozzles and flexible spray wand for hard to reach areas
  • Included one-quart cup can be used for application to small areas
  • One stir paddle (attaches to drill)
  • One 12-inch siphon tube (1/2 Inch ID, 5/8 Inch OD Metal Conduit)
  • LizardSkin coatings should not be applied when abient temperature is below 70 degrees.



    		•

    		628-50100
    		Ceramic Insulation
  • 2-Gallons
    View this item
    		• $163.99
    Ships

    		628-50100K
    		Ceramic Insulation Complete Kit
  • Includes: SuperPro Spray Gun Kit
  • 2-Gallons
    View this item
    Easy Kits
    		• $243.99
    Ships

    		628-50115
    		Sound Control Formula
  • 2-Gallons
    View this item
    		• $139.99
    Ships

    		628-50115K
    		Sound Control Formula Complete Kit
  • Includes: SuperPro Spray Application Kit
  • 2-Gallons
    View this item
    Easy Kits
    		• $219.99
    Ships

    		628-50125
    		SuperPro Spray Application Kit
     View this item
    		$79.99
    Ships