Moroso Electric Water Pumps - JEGS

Moroso Electric Water Pumps


Moroso
Moroso Electric Water Pumps

Product images may differ from actual product appearance.

Moroso Polished Electric Water Pumps have a unique impeller design and polished housing that operate as an integral unit to pump approximately 19 gallons per minute. The powerful 12 volt electric motor eliminates the V-belt drive and draws only 7 amps, allowing the battery to remain more fully charged during racing without an alternator. These electric water pumps weigh less than conventional mechanical pump with separate electric drive motor. It mounts in the stock location; alternator and power steering drive kits available separately. Overall pump height similar to stock pump height. Use with Hose Adapters. Water outlet size -16AN.

Features:
High Flow Rate
  • Unique impeller design and polished housing operate as an integral unit to pump approximately 19 gallons per minute
    Adds up to 20 HP
  • Powerful 12-volt electric motor eliminates V-belt drive
  • Draws only 7 amps, allowing the battery to remain more fully charged during racing without an alternator
    Lightweight, Easy to Install
  • Weighs less than conventinoal mechanical pump with separate electric drive motor
  • Mounts to stock location; alternator and power steering drive kits available separately
  • Overall pump height similar to stock pump height
  • Use with Electric Water Pump Hose Adapters
  • Water outlet size: 1" NPT

    Moroso Billet Electric Water Pumps Have an electric motor with heavy-duty windings, precision balancing, long-life brushes, stainless steel shaft, and sealed ball bearings that are superior in quality and performance to any other brand. Mounts directly to stock water pump location, includes stainless steel mounting hardware and gasket for simple installation. Eliminates drive belt and fan to save weight and horsepower, while providing maximum circulation to improve cooling efficiency during all driving conditions, especially while idling. Compatible with 12 and 16 volt systems. High-temperature Viton seal eliminates leaks. Machined with -16AN inlet holes (except BB-Mopar). Use with hose adapters (sold separately). Clear anodized 6061-T6 aluminum pump housing and impeller with black powdercoated outer case will provide years of dependable, rust-free operation.

    Features:
  • Each pump plate has been re-profiled and pocketed to remove unnecessary weight
  • Average overall pump heights have been shortened by 3/4" and up to 2 lbs. weight reduction on average per pump
  • Electric motor with heavy-duty windings, precision balancing, long-life brushes, stainless steel shaft and sealed ball bearings is superior in quality and pumps more weather through the system during actual operating conditions than competing pumps
  • Mounts directly to stock water pump location, includes stainless steel mounting hardware and gasket for simple installation
  • Eliminates drive belt and fan to save weight and horsepower while providing maximum circulation to improve cooling efficiency during all driving conditions, especially while idling
  • Compatible with 12 and 16-volt systems
  • High-temperature Viton seal eliminates leaks
  • Machined with new -16AN port (except Big Block Mopar) for easier installation of new hose adapters, elininating the need for teflon tape or pipe sealants
  • Pumps can easily accommodate lower radiator hose from either driver or passenger side installations
  • Clear anodized 60061-T6 billet aluminum pump housing, impeller, pump plate and motor cap along with power-coated outer case will provide years of dependable operation
  • Draws only 7 amps, allowing the battery to remain more fully charged during racing without an alternator



    		•
    0 View All

    0 View All