FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

Ridetech RidePro Air Control Systems


Ridetech
Ridetech RidePro Air Control Systems

Product images may differ from actual product appearance.

The RidePro from Ridetech is the most reliable 12-volt air valve control system on the market today! The RidePro assembly can be placed anywhere in the vehicle while the switches and gauges can be mounted on the console, in the dash, the glove box, etc. The RidePro uses air valves that have a larger orifice so they can flow more air which decreases the rise time. Ridetech only recommends the 4-way mode configuration when using four airbags (two airbags per axle) on your vehicle. A 4-way system decreases rise time due to double the amount of orifices compared to a 2-way system. Also, the 4-way mode increases handling by preventing air transfer from side-to-side unlike the less effective 2-way. This helps to improve cornering and reduce body roll.

Ok, I'll tell you exactly why a 2-way system is NOT the way to go when using four airbags...A 2-way system utilizes only two air valves; that means, on a typical vehicle with four airbags, you have one valve and air line for the two front airbags and only one valve and air line for the two rear airbags. While cornering, with a 2-way system, the airbag being compressed or "loaded" will transfer and increase the air pressure to the opposite side air bag. This pressure transfer will "lift" the side of the car on the inside of the turn, increasing body roll which greatly decreases handling characteristics and creates a potentially dangerous driving situation. So, at this point - the only reason to use a 2-way system is if your vehicle has only 2 airbags.
A 4-way system has four air valves, which allows you to better ''tune'' your ride and handling however you see fit. A 4-way dedicates a single valve and air line to each airbag which means the pressure you set for that airbag remains constant, no matter what! Which means, plain and simply, A 4-way system presents a much more stable, predictable and safe handling vehicle.

Ridetech uses only DOT approved airlines, DOT approved fittings, bubble-tight leak-free solenoids, and weatherpak wiring connectors to ensure a weather tight seal. The RidePro is also compatible with future products such as the AutoLeveling and remote control air suspension systems.




The RidePRO Analog manual control 4-way compressor systems - for the budget minded builder.
The classic, standard, non-electronic systems that use the highest quality valve bodies, compressors, and components to deliver dependable and repeatable manual control.
  • Manual controls provide the simple and accurate ability to inflate or deflate each air spring.
  • Control panel has dual needle air pressure gauges and four switches that activate the RidePro air valves.





  • The high tech RidePRO e3 digital control system features a digital display and will let you easily inflate and deflate your air spring at will. But the e3 also features three pre-set buttons and gives you the capability to program three different, complete ride heights for your vehicle into the RidePro e3 system. So you can quickly set your cars stance at the push of a button, just like choosing your favorite radio station. It will automatically adjust to your pre-selected psi based ride height using the e3 systems included air pressure sensors.
    For instance, you could pre-set button #1 for that ''I'd have to dig a hole to get it any lower'' metal-on-asphalt stance when parked, button #2 is for cruising so low that you push pebbles and head-butt ants, and button #3 is a ''bring it on'' highway speed road kill clearance altitude...just saying. You can set yours how you see fit.
  • Three ride height presets with optional ''Ride height on start'' feature.
  • Solid state internal compressor relays eliminate external compressor relays and wiring
  • Waterproof ECU allows mounting anywhere on vehicle.
  • Transflective display uses sunlight to illuminate... the brighter the sun, the brighter the display
  • Can easily add the LevelPRO digital right height sensors that intelligently utilizes both air pressure and ride height information to accurately adjust vehicle suspension level





  • Ridetech took the RidePRO e3 digital system and pre-assembled, wired and plumbed all the major components of the air system and even mounted the all of these components together, on one single mounting plate. This completely integrated air compressor system eliminates hours of installation time!
  • Pre-Wired, Pre-plumbed, Pre-tested!
  • Only 4 plumbing connections and only 3 wiring connections to make
  • Save 10-15 hours of installation time
  • Compact size allows easy installation
  • Easy 4 bolt mounting





  • The LevelPRO ride height sensor upgrade provides the e3 system a unique combination of ride height sensors AND air pressure sensors to quickly achieve your selected ride height. Adding LevelPRO ride height sensors allows the system to monitor actual height of the vehicle in addition to air pressure at each wheel. By comparing the position of the ride height sensor to the air pressure the vehicle is leveled with no cross-loading. This provides more accurate leveling, even under varying load conditions.



    15 Products
    RidePRO Analog

    029-30154000
    RidePRO Analog Control
  • 3 Gallon Tank
  • Single Compressor
  • 4-Way System

    More info on Ridetech 30154000
    • FREE
    • SHIPPING
      & HANDLING!
  • $1,000.00
    Order Today Ships 04/23/14

    029-30154100
    RidePRO Analog Control
  • 5 Gallon Tank
  • Dual Compressors
  • 4-Way System

    More info on Ridetech 30154100
    • FREE
    • SHIPPING
      & HANDLING!
  • $1,200.00
    Order Today Ships 04/23/14

    029-30142000
    RidePRO Analog Control
  • 3 Gallon Tank
  • Single Compressor
  • 2-Way System for Single Axle/2 Airbag System

    More info on Ridetech 30142000
    • FREE
    • SHIPPING
      & HANDLING!
    Installation Instructions for Ridetech 30142000
  • $800.00
    Order Today Ships 04/23/14
    RidePRO e3 Digital

    029-30334000
    RidePRO e3 Digital Control
  • 3 Gallon Tank
  • Single Compressor
  • 4-Way System

    More info on Ridetech 30334000
    • FREE
    • SHIPPING
      & HANDLING!
    Installation Instructions for Ridetech 30334000
  • $1,500.00
    Ships

    029-30334100
    RidePRO e3 Digital Control
  • 5 Gallon Tank
  • Dual Compressors
  • 4-Way System

    More info on Ridetech 30334100
    • FREE
    • SHIPPING
      & HANDLING!
    Installation Instructions for Ridetech 30334100
  • $1,700.00
    Ships
    RidePRO e3 Digital Airpod

    029-30314000
    RidePRO e3 Digital Control Airpod
  • 3 Gallon Tank
  • Single Compressor
  • 4-Way System
  • Pre-Wired / Easy to Install

    More info on Ridetech 30314000
    • FREE
    • SHIPPING
      & HANDLING!
    Installation Instructions for Ridetech 30314000
  • $1,800.00
    Order Today Ships 04/23/14

    029-30314001
    Airpod Cover
  • fits 3-gallon tank, single compressor airpod

    View this item
    • FREE
    • SHIPPING
      & HANDLING!
  • $100.00
    Order Today Ships 04/23/14

    029-30314100
    RidePRO e3 Digital Control Airpod
  • 5 Gallon Tank
  • AMK LFK12 Compressor Upgrade
  • 4-Way System
  • Pre-Wired / Easy to Install

    More info on Ridetech 30314100
    • FREE
    • SHIPPING
      & HANDLING!
    Installation Instructions for Ridetech 30314100
  • $2,000.00
    Ships
    LevelPRO

    029-30400032
    LevelPRO Sensors
  • 2/pkg.

    More info on Ridetech 30400032
    • FREE
    • SHIPPING
      & HANDLING!
    Installation Instructions for Ridetech 30400032
  • $250.00
    Order Today Ships 04/23/14
    Single Axle Air Systems

    029-30111500
    Manual Control Compressor System
  • Single Compressor - No Tank
  • 1-Way System for AirOverLeaf or overload type applications

    More info on Ridetech 30111500
    • FREE
    • SHIPPING
      & HANDLING!
    Installation Instructions for Ridetech 30111500
  • $300.00
    Order Today Ships 04/23/14

    029-30131600
    Manual Control Compressor System
  • Single Compressor - No Tank
  • 2-Way System for AirOverLeaf or overload type applications

    More info on Ridetech 30131600
    • FREE
    • SHIPPING
      & HANDLING!
    Installation Instructions for Ridetech 30131600
  • $350.00
    Order Today Ships 04/23/14
    Components & Accessories

    029-31008500
    Remote Control System for RidePRO e3
  • Includes 2 Key Fob Transmitters

    More info on Ridetech 31008500
    • FREE
    • SHIPPING
      & HANDLING!
    Installation Instructions for Ridetech 31008500
  • $150.00
    Order Today Ships 04/23/14
    RidePro Compressor Systems

    029-ARC4000
    4-Way System
    More info on Ridetech ARC4000
    • FREE
    • SHIPPING
      & HANDLING!
    $1,000.00
    Order Today Ships 04/23/14

    029-ARC4000E2
    RidePro-e2 Compressor System,
  • Electronic Controlled 4-Way System

    More info on Ridetech ARC4000E2
    • FREE
    • SHIPPING
      & HANDLING!
  • $1,500.00
    Order Today Ships 04/23/14

    029-30234100
    RidePro-e2 Compressor System
  • Electronic Controlled 4-Way System

    More info on Ridetech 30234100
    • FREE
    • SHIPPING
      & HANDLING!
  • $1,741.99
    Order Today Ships 04/28/14

    15 Products