Speed Tech Suspension 67-69 Camaro/Firebird and 68-74 Nova Subframe

The Speed Tech subframe is an affordable direct replacement for your factory worn out old subframe. Speed Tech Performance's subframe offers the benefits of: Rack and pinion rear mount steering, built in Guldstrand Mod (this gives additional negative camber), coil over shock compatible, adjustable transmission crossmember and more. You can reuse all your current aftermarket suspension components such as control arms and sway bar, brakes and wheels. For maximum handling and performance, upgrade to Speed Techs new HI Clearance tubular control arm set to hold up to a P275 tire on a 10'' wheel. The Sub frame accepts small and big block Chevy's using the stock oil pan and also accepts the GM LS series engines using most after market oil pan and motor mount adaptors.

Directly bolt on any factory replacement tubular control arms that worked with your original frame

A true coil over compatible combination. This subframe will work with factory style spring set up

Extra adjustments built into the frame to fine tune your suspension.

Fully adjustable transmission cross member fits all GM Transmissions also T56 and TKO

Strong box construction, laser cut and jig welded

Reduced weight with subframe weight at only 125 lbs.

Optional Speed Tech Hi Clearance control arms have been tested to fit a 18'' x 10'' wheel with a 7'' back space

Factory alignment hole to ease in the installation and alignment of the subframe

Built in tow/tie down hook mounts, no more wrapping tie downs around your painted frame

Increased header and exhaust clearances

Can reuse your existing sway bar if using any factory replacement tubular control arms

Fits small and big block Chevy's with original oil pan

Fits GM LS engines with most aftermarket oil pans

Subframe kit includes:

Subframe

Adjustable Transmission Crossmember

Billet Aluminum Upper Coil-Over Mounts

Adjustable Motor Mounts

Subframe works with optional and required parts:

Unisteer Rack and Pinion System part number 668-8010540-01 Power or part number 668-8000770-01 Manual (required)

QA1 Coil-Over shocks part number 122-DR4855P (or equivalent - optional)

QA1 T-bar Kit for shocks part number 122-BAR350K (required if QA1 shocks are used)

Speed Tech Sway Bar exclusively for use with Speed Tech Hi Clearance Control Arms part number 967-SFSWAYBAR (required only if Speed Tech HI Clearance Control Arms are used)

*This kit is a bare metal sub-frame only and does not include any suspension, brake or like components, as shown in photos.