FREE SHIPPING & HANDLING!*
Order by 11 PM EST
for Same Day Shipping!
VHT Engine Enamel
Product images may differ from actual product appearance.
VHT Engine Enamel is a unique formula of urethane resins that resist: fading, harsh solvents, corrosion, and 550°F temperatures. No other air-dry coatings withstand the contents of today's cleaners & fuel as well as VHT. Factory engine colors available for restoration and customization.
Do not use in temperatures less than 70°F or on parts below room temperature
Thoroughly clean surface--remove all grease, oil, loose paint, and rust
Lightly sand any areas already painted, making sure to feather rough edges
Wipe parts to be painted with a tack cloth, carefully removing dust and debris
Primer is not required but you can spot prime as needed
Hold VHT can 12"-15" away from prepped surface
Spray enamel in one direction using long, steady strokes. Repeat in opposite direction.
Wait approximately 30 minutes before recoating--apply only enough to color surface evenly
Excessive application is unnecessary and will cause blistering and loss of adhesion
If touch-up is needed after 4 hours, light sanding may be required
To Cure Whichever curing method you choose must be done slowly
Air: Enamel dries in 1 hour and cures overnight
Booth: Bake 15 minutes at 300°F then 30 minutes at 350°F (improves durability and resistance to salt spray, chemicals, and humidity)
Engine: Idle engine for 15 minutes and then let cool; idle engine again no more than 1 hour and let cool
Operation: The inherent heat output during operation of an engine or exhaust can cure the enamel
Over 50 years of experience delivering the best in High Performance Auto parts. JEGS has the knowledge and technical support staff along with 100% satisfaction guarantee. Our warehouse is filled with millions of name brand parts ready for same day shipping.
What You Want - When You Want It - At the Price You Want to Pay