FREE SHIPPING & HANDLING!*                           Order by 11 PM EST for Same Day Shipping!

VHT Flame Proof Header Paint


VHT
VHT Flame Proof Header Paint

Product images may differ from actual product appearance.

VHT Flame Proof Paint Coating was originally developed some 30 years ago and is now used as a protective paint coating for the white-hot surfaces of space-bound and re-entry vehicles.
Since its inception, numerous industrial, automotive, and electrical engineers have developed new ideas for applications of VHT flameproof paint. These include aerospace hardware, smoke stacks, jet engines, heat exchangers, boilers, heaters, exhaust manifolds, mufflers, steam pipes, barbecues, electrical hardware, and countless other applications where resistance to high temperatures and/or weathering is required.

Flame Proof Paint Application: Apply a THIN, even coat of VHT FlameProof Paint - just enough to thoroughly COLOR. Excessive build-up is not necessary or recommended. In applications requiring heavy coating, build-up should be done in stages, each successive coat being cured as recommended below. Nominal coating wet thickness .0015'' - .002''.

VHT FlameProof paint coatings require no primer. For most economical use of VHT FlameProof colors on ''hard to hide'' surfaces, apply a thin coat of VHT FlameProof White or VHT FlameProof Silver base coating.

Curing: VHT FlameProof coatings will air dry in 15 to 30 minutes and if handled with reasonable care, may be put to immediate use. Heat curing method for maximum resistance to solvents, salt spray, humidity, thermal shock and heat:

  • 15 minutes at 250°F
  • 30 minutes at 600°F
  • 1 hour at 800°F
  • 30 minutes at 1,000°F

    On non-traffic surfaces and where solvent resistance is not required, VHT FlameProof coatings may be used as air-dried. Curing may be accomplished by the inherent heat of operation such as encountered in engine manifolds and exhausts, boilers, heaters, etc. or by following the curing instructions below.

    On the Vehicle

  • Paint must be completely dry before curing
  • Run at idle for 10 minutes
  • Cool for 20 minutes
  • Run at idle for 20 minutes
  • Cool for 20 minutes
  • Run under normal operating conditions for 30 minutes

    Off the Vehicle

  • Paint must be completely dry before curing
  • Heat to 250°F (121°C) for 30 minutes
  • Cool for 30 minutes
  • Heat to 400°F (204°C) for 30 minutes
  • Cool for 30 minutes
  • Heat to 650°F (343°C ) for 30 minutes

    Curing VHT FlameProof™ Coating only attains its unique properties after correct curing (refer to instructions on the can).


  • 13 Products

    322-SP101
    Flameproof Coating, White
    ORMD Item - Ground Shipping Only
    $12.99
    Ships

    322-SP102
    Flameproof Coating, Black
    ORMD Item - Ground Shipping Only
    $11.99
    Ships

    322-SP104
    Flameproof Coating, Gray
    ORMD Item - Ground Shipping Only
    $11.99
    Ships

    322-SP106
    Flameproof Coating, Silver
    ORMD Item - Ground Shipping Only
    $12.99
    Ships

    322-SP108
    Flameproof Coating, Yellow
    ORMD Item - Ground Shipping Only
    $10.99
    Order Today Ships 12/31/14

    322-SP109
    Flameproof Coating, Red
    ORMD Item - Ground Shipping Only
    $12.99
    Ships

    322-SP110
    Flameproof Coating, Blue
    ORMD Item - Ground Shipping Only
    $12.99
    Ships

    322-SP114
    Flameproof Coating, Orange
    ORMD Item - Ground Shipping Only
    Was: $12.99
    Now: $8.99
    Ships

    322-SP115
    Flameproof Coating, Clear Satin
    ORMD Item - Ground Shipping Only
    $12.99
    Ships

    322-SP117
    Flameproof Coating, Aluminum
    ORMD Item - Ground Shipping Only
    $10.99
    Ships

    322-SP118
    Flameproof Coating, Primer
    ORMD Item - Ground Shipping Only
    $12.99
    Ships

    322-SP998
    Flameproof Coating, Cast
    ORMD Item - Ground Shipping Only
    $12.99
    Ships

    322-SP100
    VHT Flameproof Coating; Flat Gray Primer; 11 oz. Aerosol;
    ORMD Item - Ground Shipping Only
    $12.99
    Ships

    13 Products