Free Shipping on Auto Parts Orders Over $75.                           Order by 11 PM EST for Same Day Shipping!

Wilwood GNX4 Off-Road Forged Billet Brake Caliper

Wilwood GNX4 Off-Road Forged Billet Brake Caliper

Product images may differ from actual product appearance.

GNX4 Four Piston Brake Calipers Offer Superior Strength and Unparalleled Piston Design!

Wilwood's GNX4 brake caliper generates positive pedal response and high clamping efficiency with a substantial weight savings over comparable OE Calipers. Forged billet aluminum bodies, stainless steel pistons, and high-temperature seals put an end to the rust, bore pitting, and seal failures that plague many OE caliper design.

Stainless steel pistons delay the heat transfer from the pads while the aluminum calipers dissipate the heat quicker than the OE cast iron calipers. Cooler operating temperatures translate into longer service life, regardless of the driving environment. Each caliper also uses stainless SRS bridge plates to reduce wear from pad gouging at the caliper bridge. The spring-loaded action of the SRS plates also reduces noise by eliminating pad rattle and dampening the engagement harmonics.

  • Four corner bleed screws allow the caliper to be mounted in any front, rear, right, or left position
  • Built for extreme off-road environments including deep mud, sand or rigorous mountain terrain
  • Four dusted booted pistons provide optimum performance and ultimate reliability
  • Internal fluid passages - no external tubes
  • Clear anodized finish
  • Technical Note: Current GNX4 caliper assemblies are designed solely for use with DOT 5 fluids and should not be used with DOT 3, 4 or 5.1 fluids.

  • 1 Product
    Wilwood 120-10754 - Wilwood GNX4 Off-Road Forged Billet Brake Caliper
    GNX4 4 Piston Forged Billet Caliper
  • Lug Mount
  • 1.88'' / 1.88'' Piston Bore Sizes
  • 1.00'' Brake Disc Width
  • Universal Left/Right Hand Mount
  • Clear Anodized Finish
  • FREE
    Order Today Ships 07/13/16

    1 Product