0
0
's Account
1-800-345-4545
Gift Cards
Track Order
Help
Click image to zoom
AEM Induction 41-1001C

AEM Induction ETI Cold Air Induciton System 2009-11 for Nissan 370Z 3.7L +9.67 HP Increase Gunmetal Gray

598-41-1001C

made in usa
Free Shipping Ships directly from the manufacturer on 10/22/19
Save $10 off $199, $45 off $499, $100 off $999. Promo Code: FALLFUN exclusions apply

$584.99
AEM Induction ETI Cold Air Induciton System 2009-11 for Nissan 370Z 3.7L +9.67 HP Increase Gunmetal Gray $584.99
Out of stock
QTY
ETI Cold Air Induciton System
  • 2009-11 for Nissan 370Z 3.7L
  • +9.67 HP Increase
  • Gunmetal Gray
  • AEM Induction 41-1001C Details

    Nissan

  • Guaranteed Perfect Fit
  • Provides Superior Filtration
  • Comprehensive Installation Instructions
  • Manufactured And Assembled In The USA
  • Limited Lifetime Warranty

  • Specifications:

    Air Filter Large End Diameter
    5.5 in (140 mm)
    Air Filter Outlet Shape
    Round
    Clamp Material
    Steel
    Clamp Style
    Regular
    Clamps Included
    10
    Couplers Included
    0
    Estimated Horse Power Gain
    9.67 HP @ 7100 RPM
    Filter Color
    Red
    Filter Material
    Non-woven Synthetic
    Horse Power Increase
    10 HP
    Intake Pipe Material
    Aluminum
    Manufacturer's Part Number:
    41-1001C
    Shipping Weight:
    14.94
    Package Height:
    10.25
    Package Depth:
    36.188
    Package Width:
    18.125

    Electronically Tuned Intake (ETI) Systems are raising air intake engineering standards once again. With a revolutionary ETI module and fully integrated design, which have eliminated the need to detune or stage intake tube diameter as it crosses the MAF sensor. These air intake system adjusts the sensor electronically to read proper air density instead of using physical tube designs intended to "trick" the MAF reading. The result is bigger horsepower and torque gains.

    Tech Talk:
    Most modern fuel injected cars use a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube because the airspeed is reduced. This causes the MAF sensor to "under report" air flow causing a lean condition or triggering a Check Engine Light. To accommodate MAF sensor reporting, many intake systems reduce the diameter of the intake tube near the MAF sensor to stock or near stock size because of the need to maintain the correct air speed for the sensor to report the correct flow rate to the ECU.

    AEM's ETI Intake Systems use an alternative design approach that allows the intake tube to maintain its diameter, resulting in more air flow into the throttle body. The ETI Intake System allows AEM to tune an engine for even more power by avoiding any tube down-sizing that will reduce overall airflow and horsepower. Instead, the ETI electronically communicates with the MAF sensor to ensure an accurate amount of fuel is being delivered even though the tube is larger in size than the stock system. This means the vehicle maintains the calibration as intended by the factory while enjoying the benefits of our custom designed aftermarket intake system.

    Does AEM Induction 41-1001C fit your vehicle?

    Narrow Results

    2010-2011  NISSAN 370Z

    • Fitment_Note: California Air Resources Board Exempt: Yes; CARB EO: D-670-15; AEM - Metal Intake System; Gunmetal Gray (ETI)
    • Liter: 3.7
    • Aspiration: NATURALLY ASPIRATED
    • SubModel: TOURING
    • Engine Vin: -
    • CUI: 226
    • EngineType: V6 ( 3.7 L / 226 )
    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.