CD-7 Carbon Digital Racing Dash Displays
AEM 30-5703F CD-7FLG Carbon Flat Panel Data-Logging/GPS Display Features:
- 200Mb internal data-logging, up to 1,000Hz per channel
- Onboard 20 Hz GPS receiver and antenna
- Available Vehicle Dynamics Module for the onboard GPS 30-2206 (sold separately) will provide a 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping, and lap timing
- Accepts channels from AEMnet CAN-enabled devices and non-AEM CAN bus devices side by side
- Seven programmable pages including four main pages, alarm, on-change, and start-up pages with button kit 30-3610 (sold separately)
- Programmable dedicated alarm page quickly identifies problems
- On-change page can be used to identify map switching for boost, traction, or lap times
- Included page layouts to input channels and text, or customize with included graphics editor software
- Odometer function
- Over 200 fully programmable SAE and custom warning icons
- Headlight-in connection dims the dash and LEDs lights during night operation
- (2) extra switch inputs included for displaying user-triggered events
- Convert CAN bus channel values to user-defined text
- Compatible with OBD II factory ECUs using CAN Adapter Cable 30-2217 (sold separately)
- Install on carbureted and pre- OBD II ECU-equipped vehicles using a 22-channel CAN Sensor Module 30-2212 or 6-channel CAN Sensor Module 30-2226 (sold separately)
- (8) additional temperature inputs with 8-channel K-Type EGT CAN Module 30-2224 (sold separately)
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.