Advance Adapters 712518 Features:
- This adapter plate assembly is used to adapt a Ford Engine to the Jeep T18/T98 4 speed manual transmission. The adapter plate is 3.50 in. in length a is manufactured from 356-T6 heat treated aluminum alloy. Included in the adapter plate kit you will receive a two piece adapter plate, Ford 4.848 in. bearing retainer, pilot bushing, seal, fastening hardware, and adapter instructions.
- Note: This adapter plate kit only fits T-18 transmission with an input shaft stick out of 10 in..
- Note: This adapter plate design kit requires Ford bell housing.
- Transmission
- The T-18 is a heavy duty four speed with unsynchronized first gear. These transmissions were manufactured by Borg Warner and they have a cast iron case. The casting number on the drivers side of the T-18 is T-18 or 13-01. The T-18 has a 1 1/8 in. 10 spline input shaft and a 1 3/8 in. 6 spline output.
- The T-98 has a very similar appearance to the T-18 except a casting number of T98. It is heavy duty like the T-18. The T-98 has a 1 1/8 in. 10 spline input shaft and 1 3/8 in. 6 spline output.
- JEEP T-15 3SP LATE FORD V8 / 712511
- ADAPTER CASTING 2 THICK / 711521-2
- BUSHING (STK FORD) .670 / 716173
- H.H.C.S. 7/16 -14 X 1-3/4 gr.5 zinc / 724308
- LOCK WASHER 7/16 STD PLTD / 724303
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.