Application specific billet, adjustable fuel pressure regulator. Specially engineered for fitment and optimum flow and pressure control on Honda and Acura engines. Provides fully adjustable base fuel pressure, 1:1 rising rate for forced induction engines if necessary and mounts directly to a factory or aftermarket Honda or Accura fuel rail equipped with the factory style fuel pressure regulator mounting pad. Adjustable base pressure from 30-70 PSI. Fuel pressure rises on a 1:1 ratio with boost. Compatible with gas and ethanol based fuels. Connects to the stock fuel rail and return line. 1/8' NPT dedicated gauge/pressure testport. Suitable for pumps from stock flow up to A1000. The same Aeromotive flow and pressure control demanded by top racers and tuners, rolled into a Honda specific, bolt-on package.
These regulators are a direct bolt on for the stock fuel rails. They are made of billet 60/61 T651 aircraft aluminum alloy and are adjustable from 30 to 70 psi. The regulators also have a 1/8 NPT gauge port, and are boost referenced (if you are running a turbo or supercharger). They bright dip anodized with an exclusive splash anodized finish so that no two regulators are exactly alike.
- Adjustable base pressure from 30-70 PSI.
- Fuel pressure rises on a 1:1 ratio with boost.
- Compatible with gas, E85, and ethanol based fuels.
- Connects to the stock fuel rail and return line.
- 1/8′ NPT dedicated gauge/pressure test port.
- Suitable for stock flow pumps yet flows enough for larger pumps such as the Stealth 340.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.