All-Pro Off Road WELD-ON CAM TAB GUSSETS
024-AP-307416
Product Q&A
View Now
Weld-on Lower Control Arm Alignment Cam Tab Gussets
A great alignment can mean the difference between a truck that is a pleasure to drive and one that brings frustration. Those of us who push Toyota Tacoma, Tundra, 4Runner, or FJ Cruisers to the limits of a stock vehicle have found that factory lower control arm alignment cam tabs can be bent out of shape after a good bounce off of a boulder or slide down a ledge. Once bent, the cam tabs no longer serve their purpose to keep lower control arm bolts in place and the truck may develop a pull to the left or right along with uneven tire wear.
All-Pro Weld-on Lower Control Arm Alignment Cam Tab Gussets are designed to replace the thin factory cam tabs with thick plates that won't bend even under harsh off-road abuse. Installation requires grinding off the old plates and welding new tabs in place. Are you planning to upgrade your control arms soon? We recommend taking the extra time to reinforce the mounting tabs while you have it disassembled. It's the little steps done well that ensure years of reliable use on and off-road.
AVAILABLE OPTIONS:
- AP-305653 - 1995-2004 Tacoma, 1996-2002 4Runner
- AP-305655 - 2005-2015 Tacoma, 2003-2009 4Runner, 2007-2009 FJ Cruiser
- AP-307417 - 2007+ Tundra
- AP-307416 - 2016+ Tacoma, 2010+ 4Runner, 2010+ FJ Cruiser
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.