Lift Pump Kit (OEM Bypass/Replacement)
These BD Diesel lift pumps are designed to replace your stock lift pump. The stock lift pump is barely adequate for the stock engine, so when you start adding the latest in performance electronics or bolt-ons, it can soon be overwhelmed by fuel demand, placing additional strain on the injection pump.
It is designed to bypass/eliminate the use of the stock pump on the motor. The BD Diesel lift pump mounts directly on the frame rail with all the supplied hardware and wiring harness that plugs directly into your factory harness. The pump mounts directly on the frame because it's easier for the pump to push fuel rather than pull it from the tank and the vibrations from the motor shorten the life of the pump when it's mounted on the engine.
If your stock pump is still good and your just looking for a little added security you should look into the auxiliary Lift Pump Kit, you can add a proven second lift pump to ensure that your 1998.5-2002 VP44 or 2003-2007 CP3 pump has ample fuel to support over 600 horsepower! So don't be concerned about hard starts because BD's proprietary switch solves hard start issues common with other lift pump kits. Everything you need for a simple installation is included.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.