Baer SS4 and SS4+ systems come with everything needed for installation including vehicle specific stainless steel braided brake hoses; billet aluminum hubs with bearings and seals, pre-installed - packed in Redline synthetic grease and all necessary mounting hardware.
Rear systems use our S4 rear specific calipers with correctly matched piston area's to ensure proper brake bias when used with any of Baer's Extreme Plus, Pro Plus, Track4 or SS4+ front systems, and are mated to 12" one-piece, drilled and zinc plated rotors. SS4+ rear systems include "drum style" park brake mechanisms for superior holding power, and a clean, clutter free look. Designed to fit 15" or larger wheels.
And as with all of Baer's brake systems, these systems are meant to be driven on the track and on the street! Unlike our competitors, you will never see a disclaimer on the box stating "Not for Street Use". The S4 calipers used in the SS4+ systems have pad anti-rattle clips, dust and weather seals and are fully DOT compliant. SS4+ systems also utilize vented rotors instead of "solid" disc's for proper cooling and maximum fade resistance whether "On-Track" or Cruisin' the Boulevard! Track width remains unchanged as well. This means stock wheel off-sets and suspension geometry are maintained.
So if you are looking for a Street Legal, lightweight, Drag Strip or Autocross compatible brake system, look no further. Baer has the solution you are looking for!
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.