Blueprint Engines Small Block Chevy 383ci Dress Engine 405HP/440TQ
138-BP3830CTC1
Product Q&A
View Now
| Ratings |
|---|
| Price |
| Brand |
Dress Engine
Engine Break-In Procedure
Use or break-in oil or conventional (non-synthetic) multi-viscosity oil with zinc additive for the first 500 miles of operation. Avoid hard acceleration for sustained periods. Periodically change the engine speed while driving to help seat the rings. While the engine is running, be sure to check oil pressure and coolant temperature, and check for fluid leaks, such as oil, transmission fluid, fuel, and coolant/antifreeze. Also listen for any unusual sounds. Should you hear an unusual sound, shut the engine off, check for the source, and correct it.
Engines with flat tappet cams only - Start the engine and bring it to 2,000 RPM. Get the engine running smoothly. Then vary the engine speed from 1,800-2,200 RPM in a slow acceleration/deceleration cycle for 30 minutes. This is necessary to provide adequate oil splash and lifter rotation to properly mate each lifter to its lobe.
At 500 Miles change the engine oil and filter using conventional (non-synthetic) oil. After 6,000 miles, synthetic oils can be used in your engine. For flat tappet cam engines, continued use of oil with zinc or a zinc additive for the life of your engine is recommended.
Are the indentify numbers or JEGS part number on the block and where
Would this engine work in a 1997 k1500. If so what all would I need? Is my transmission (4l60e) going to be an issue? My engine is TBi , would this affect my computer? Thanks in advance.
Are the engine already broken in? And is timing set, for best performance? What’s the warrant on the engine?
What fuel psi do I need for this motor so when I open full throttle it does starve out
Will this engine fit into a 1978 Pontiac Firebird?
This can't be paired to a 700r4 transmission can it?
Do you offer an " easy kit" with a 4l60e 4x4. 97. And$??
I live in an emissions state. And have a 97 k1500 z71. Will this set a mil lamp because of carb vs furl injected? If so will O.E. manifold n injection work? Or will I need to get holly n or Fi tech to fit provided intake?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.