- Engines & Components
- Engine - Assembled / Ready-to-Run
- Blueprint New Block Casting Cruiser Small Block Chevy Crate Engine 350 ci / 341 HP / 371 ft-lbs. TQ
Blueprint Engines New Block Casting 350 ci Cruiser Crate Engine [Fuel Injected]
138-BP350CTF
![New Block Casting 350 ci Cruiser Crate Engine [Fuel Injected]](http://www.jegs.com/images/photos/100/138/138-bp350ctf.jpg "New Block Casting 350 ci Cruiser Crate Engine [Fuel Injected]")
Items You Need
EFI Crate Engine
Blueprint 350 ci Fuel Injected Cruiser Crate Engine with 9.0:1 compression ratio can be run on 87 octane pump gas. Its camshaft profile provides up to 18 in. of vacuum and is designed to work with a stock torque converter and stock rear-end gears.
Blueprint 350CTF Features:
- Power Ratings:
- 341 Horsepower (HP)
- 371 ft.-lbs. Torque (TQ)
- 9.0:1 Compression Ratio
- Blueprint Engine Block:
- New Cast Iron Block
- 4-Bolt Mains
- 4.000 in. Bore
- One-Piece Rear Main Seal
- Provision for Mechanical Fuel Pump
- Right (Passenger) Side Dipstick
- Drilled and Tapped for Mechanical Clutch Linkage
- Rotating Assembly:
- Cast Iron Crankshaft w/3.480 in. Stroke
- Forged 5.700 in. Long Connecting Rods
- Hypereutectic Pistons Provide 9.0:1 Compression
- Internal Front / External Rear Balancing
- Blueprint Aluminum Cylinder Heads (138-H8002K):
- 195cc Intake Runners
- 75cc Exhaust Runners
- 64cc Combustion Chambers
- 2.02 Intake Valves
- 1.60 Exhaust Valves
- Camshaft:
- Hydraulic Roller
- .477 in.Intake Valve Lift
- .471 in. Exhaust Valve Lift
- 202° Intake / 212° Exhaust Duration @ .050 in.
- 115° Lobe Separation Angle
- Ignition and Fuel:
- Electronic Fuel Injection (EFI) System
- Aluminum Intake Manifold
- HEI Style Distributor w/Mellonized Steel Gear
- 32 Degrees Total Timing @ 3500 RPM
- Additional Included Items:
- Chrome Valve Covers
- Oil Pan
- Chrome Timing Cover
- Dyno Test Results
Emissions:
Legal for use on vehicles that were manufactured before emissions control regulations were imposed. These vehicles are considered uncontrolled vehicles and are defined as:
- 1965 and older U.S. manufactured California Certified Vehicles
- 1967 and older U.S. manufactured Federally Certified Vehicles
- 1967 and older Foreign manufactured vehicles
Specifications:
Will this go directly into a 99 tahoe
What all would be needed to put this in a 1989 Tbi truck does it have its own computer?
What would be the best balancer for this engine?
What all comes with fuel injection end of motor and what do you need when converting a 1986 Chevy c10 that was carburetor fed
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.