0
0
Account Login
1-800-345-4545
Gift Cards
Track Order
Help

Blueprint Engines STANDARD ROTATION 260 HP 1 PIECE REAR MAIN SEAL ROLLER CAM TIMING COVER PLASTIC BLOCK CAST # 880 12 BOLT INTAKE.

138-GM350LE

Ships directly from the manufacturer on 10/24/19

$2,350.00
Truck Freight:$159.00
Blueprint Engines STANDARD ROTATION 260 HP 1 PIECE REAR MAIN SEAL ROLLER CAM TIMING COVER PLASTIC BLOCK CAST # 880 12 BOLT INTAKE. $2,350.00
Out of stock
QTY
STANDARD ROTATION 260 HP 1 PIECE REAR MAIN SEAL ROLLER CAM TIMING COVER PLASTIC BLOCK CAST # 880 12 BOLT INTAKE.

Blueprint Engines GM350LE Details

Engine Break-In Procedure

Use or break-in oil or conventional (non-synthetic) multi-viscosity oil with zinc additive for the first 30 hours of operation. Avoid hard acceleration for sustained periods. Periodically change the engine speed to help seat the rings. While the engine is running, be sure to check oil pressure and coolant temperature, and check for fluid leaks, such as oil, fuel, and coolant/antifreeze. Also listen for any unusual sounds. Should you hear an unusual sound, shut the engine off, check for the source, and correct it.

Engines with flat tappet cams only - Start the engine and bring it to 2,000 RPM. Get the engine running smoothly. Then vary the engine speed from 1,800-2,200 RPM in a slow acceleration/deceleration cycle for 30 minutes. This is necessary to provide adequate oil splash and lifter rotation to properly mate each lifter to its lobe. 

After 30 hours of operation change the engine oil and filter. For flat tappet cam engines, continued use of oil with zinc or a zinc additive for the life of your engine is recommended.

 

Specifications:

Manufacturer's Part Number:
GM350LE

Items You Need

Some parts are not legal for use in California or other states with similar laws / regulations

Motor Vehicles

WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

Tools:

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

Electrical Cords

WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.