The Ford 4.6L/5.4L Modular 3V engines found in 2005-2010 Mustangs are all the rage. So the question on everyone's mind becomes, How can I further improve the performance of these powerful engines? The new COMP Cams® XFI VSR Ford 4.6L/5.4L Modular 3V (Valve Springs Required) Camshafts deliver a great power improvement over stock levels. These cams are the next step up from the COMP Cams® NSR (No Springs Required) Cams and represent a major upgrade in power production. When compared to the NSR, stock valve spring compatible cam series, the VSR cams offer a substantial power gain in the higher rpm ranges. To achieve this, a high-lift design that requires a COMP Cams® Beehive Valve Spring upgrade was created to maximize power within the limits of the OEM unmodified cam phasers. These new VSR camshafts are available for both naturally aspirated and supercharged engines, with two levels available in each series; one designed for maximizing mid-range power and torque, while the other maximizes top end horsepower.
The performance secret behind the COMP Cams® VSR Ford 3V Camshafts is in the extensive dyno testing that allowed us to determine precise cam timing events. Combining these optimized timing events with a high-lift lobe design offers substantial improvements in both power and throttle response. Designed to work flawlessly with the factory VCT, which is programmed to retard the cam timing above 4500 rpm, the new COMP Cams® XFI VSR Ford 4.6L/5.4L Modular 3V Cams optimize both mid and high rpm performance.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.