Spring Seat Cutters
This valve seat cutter allows you to enlarge the cylinder head spring pocket to 1.550" outer diameter while reducing the outer diameter of the valve guide to .630".
Most high performance engines today require the use of larger-than-stock diameter valve springs. These tools from Comp Cams will allow the engine builder to machine the cylinder head to the proper size for your spring. Each cutter requires the use of an arbor pilot, which is available in four different sizes. These arbor pilots will also work with the valve guide cutters used for shortening the guide for a high lift cam or installing a Comp Cams PTFE seal for oil control.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.