Pushrod By Length - 3/8'' Diameter
|Use with guide plates:||Yes|
Chromemoly Pushrod; Pushrod Set; Wall Thickness; 1 Piece Pushrod; Ball Pushrod; 5/16" Pushrod; .080" Wall Pushrod; Pushrods; OHV Pushrods; Replacement Pushrods
Constructed from one piece of seamless .080" wall chromemoly steel then black oxide coated and heat-treated, these 8.280" long Hi-Tech 3/8" diameter pushrods handle the requirements of today's all-out race engines.
One-Piece .080'' Wall Seamless Chromemoly
Prior to extensive research at COMP Cams, it was thought that pushrods only had to be strong enough not to fail, bend or burn up at the ends. But engineers have learned that the frequency of the pushrod must match that of all the rest of the parts in the valve train, as well as the rpm at which the engine will be run. Today's all-out race engines demand the highest quality components at every step, and COMP Cams Hi-Tech Pushrods fill that requirement.
The one-piece design from .080'' wall seamless chromemoly tubing ensures the ultimate in strength and durability. The ends are precision formed, yielding added thickness in the critical tip area for strength while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated to ensure compatibility with guide plates and for maximum strength. They are OD-ground for consistency and black oxide-finished with their length and part number laser etched on the OD for ease of identification.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.