Unrivaled Customer Service
And Expert Tech Advice!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

Crane Cams Crane Cams Blueprinted/Direct Factory Replacement Camshafts

Crane Cams 968821
Representative Image
Product images may differ from actual product appearance.


jegs shipping
FREE Shipping
Estimated to ship directly from the manufacturer on 09/04/18
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Crane Cams Crane Cams Blueprinted/Direct Factory Replacement Camshafts $136.78
Blueprinted Mechanical Flat Tappet Camshaft
(Factory ''Off-Road Special'' Camshaft)
Lift: .493''/.512''
Duration @ .050'': 257°/269°
RPM Range: 4200-7000

Crane Cams 968821 Details

1955-98 Small Block Chevy 262-400

*Note: Meets memorandum 1-A for original applications.

**Note: In order to use these camshafts in 1955-57 265ci blocks, it is necessary to machine a small groove in the rear main journal of the cam to allow oil flow to the top of the engine.

***Note: Beginning in 1987, most of the V-6 and V-8 engines were equipped with hydraulic roller camshafts. There are differences in the block to accommodate a cam retention thrust plate and the anti-rotation mechanism for the lifters. These blocks are identifiable by bolt holes for a cam retention plate under the upper timing sprocket, as well as bosses and tapped holes in the lifter valley for lifter retention hardware. The camshafts on these engines have a step nose and smaller bolt circle on the front of the cam. An earlier model camshaft may be used in these blocks by using the appropriate timing chain set and adding a thrust button when using a roller cam.
1988-99 Chevrolet 305 and 350 V-8 engines (and some 1987 350 V-8 engines) use a different configuration camshaft core than the 1955-87 engines and cannot be interchanged.

Grind Number: 3927140
Operating Range:4200-7000 RPM
Duration Advertised:N/A Intake / N/A Exhaust
Duration @ .050'' Lift:257° Intake / 269° Exhaust
Valve Lift w/1.5 Rockers:.493'' Intake / .512'' Exhaust
Lobe Separation Angle:112°
Max Lift Angle:108° ATDC Intake / 116° BTDC Exhaust
Open/Close @.050'' Cam Lift:Intake - 20.5° BTDC (opens) / 56.5° ABDC (closes)
Exhaust - 70.5° BBDC (opens) / 18.5° ATDC (closes)


Manufacturer's Part Number:
Shipping Weight:
Package Height:
Package Depth:
Package Width:

Crane Cams Blueprinted/Direct Factory Replacement Camshafts meet memorandum 1-A for original applications and feature the same specifications as OEM (Original Equipment Manufacturer).

Some parts are not legal for use in California or other states with similar laws / regulations