Stamped Steel Locks 7° - Single Groove Design These valve stem locks are manufactured from premium quality alloy steel, precision diestamped and then heat treated for maximum strength. These locks are considerably stronger than stock, and are excellent for all street-performance and moderate racing engine applications.
Machined Steel Locks 7° - Single Groove Design The ultimate in strength and wear resistance. These locks are machined from highest quality alloy steel billet material using the finest automatic screw machines and then carefully heat treated. Engineered specifically for today's high engine speeds and high-tension valve springs. These machined steel locks are the only locks to be used with our "Posi Lock" valve spring retainers. Oxide finished for corrosion protection, and color coded for assembly height identification.
Machined Steel Locks 7° - Single Bead Design These machined steel locks are precision machined and heat treated in our own facility for the latest generation of engine technology. Although primarily designed for the Chevrolet LS1/LS2/LS6 families, they are also applicable to most valve stems that require a bead-style valve lock.
Multi-Fit Valve Stem Locks 7° - Single Groove Design These steel billet heat treated Multi-Fit locks feature an increased outside diameter for additional strength, durability and fatigue resistance. These Multi-Fit locks are highly recommended for any high RPM, high valve spring tension, or heavy valve application prone to lock distortion and retainer pull-through. The 7° taper actually provides more clamping force than wider 10° taper locks and are the preferred choice of professional engine builders and racers. (Use only with Crane Multi-Fit retainers).
Multi-Fit Valve Stem Locks 7° - Single Bead Design The steel billet heat treated Single Bead Multi-Fit locks provide all of the strength and durability advantages of the single square groove design, and are compatible with most of the aftermarket bead lock valves currently available. Also available in +.050" and -.050" assembly height versions for 5/16" and 11/32" valve stems, these are designed specifically for use with only our Multi-Fit retainers.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.