Electronic devices are becoming more common in race cars today and these devices typically require lots of wiring to connect everything. This is especially true with cars using multiple stages of nitrous. Each stage requires wiring to a nitrous solenoid, a fuel solenoid, a wide-open throttle switch, common power feeds and fuses. Usually, relays are added to handle the high amperage draws. Dedenbear has designed a relay center that prewires all the relays in a single unit. Basically each stage has a signal wire going in and a power wire going out. The inputs and outputs have indicator LEDs for easy trouble shooting. All of the wiring mess is replaced with one simple, compact and reliable relay center.
- Use for high powered nitrous solenoids or other high power devices such as fuel pumps, water pumps, throttle stops, fans, etc.
- Four relays pre-wired and ganged together to power up to four stages of NOS solenoids
- One separate relay with inputs and outputs completely isolated to allow wiring in any configuration
- Relay inputs/outputs can be ''negative'' or '' positive''
- Indicator LEDs for relay coils and outputs make troubleshooting a snap.
- Easily replacable fuses and relays
- Simplifies wiring and improves reliability
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.