Unrivaled Customer Service
And Expert Tech Advice!  
Same Day Shipping Before 11 PM ET
My Cart
Shop By Vehicle
Shop By
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories

Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates

Eastwood 10429Z

Gator Guard II Liner Kit White

Eastwood 10429Z
Representative Image
Product images may differ from actual product appearance.


ORMD Item - Ground Shipping Only
jegs shipping
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Eastwood 10429Z Gator Guard II Liner Kit White $67.99
To order this item contact Customer Service at 1-800-345-4545.
Gator Guard II Liner Kit
  • White
  • 2 Part Epoxy
  • Covers 32 Square Feet

  • Eastwood 10429Z Details

    At 72 degrees F surface will remain tacky for 7 hours. After 48 hours surface will have no product transfer and may be used for heavy loads. Do not wash surface with soap, water, or any other solvents for a minimum of 2 days after application.

    This coating is appropriate for all surfaces except polyethylene and similar plastics. Lightly scuff to roughen surface before coating. Make sure surface is free of any grease or oil. Mix equal parts of A and B thoroughly. Brush or roll mixed material at a 5-10 mil thickness. For spray application using a shutz type gun, apply a medium-wet coat at 35-65 psi. Immediately clean off any overspray and applicator with mineral spirits or paint thinner. Works best between 65 and 95 degrees F. One kit coats 32 square feet with a 5-10 mill coat.


    Manufacturer's Part Number:
    Items You Need
    Some parts are not legal for use in California or other states with similar laws / regulations