Top Categories
All Categories

Top Categories

All Categories

Shop By Vehicle
Account Login
Gift Cards
Track Order
Edelbrock 21981

Edelbrock Performer Rover Intake Manifold Polished


made in usa
Free Shipping

Edelbrock Performer Rover Intake Manifold Polished $469.99
Out of stock
To order this item contact Customer Service at 1-800-345-4545.
  • 1961-1963 Buick/Oldsmobile Aluminum 215ci V8
  • 1968-up Rover 3500cc V8
  • 4-bbl Square-bore Carb Flange
  • Idle-5500 RPM Range
  • Polished Finish
  • Edelbrock 21981 Details

    Buick 215ci V8

    Installation Notes:
  • Manifold not equipped with EGR.
  • Will Not Work w/OEM Or Stock Stromberg Carbs (except Carter AVS).
  • Recommended intake gasket: Fel-Pro 375-MS96002.
  • Manifold height: (A) 5.00" (B) Rear-5.92"
  • Carb pad height: 5.46"
  • Port exit dimensions: .88" x 1.54".
  • Throttle Bracket p/n 350-8031 or p/n 350-8036 will fit and accepts GM style throttle, kickdown and cruise control cables

    Carburetor Recommendations:
  • Edelbrock Performer 500cfm Carburetor Manual Choke p/n 350-1405 , Electric Choke p/n 350-1403
  • Edelbrock Thunder AVS 500cfm Carburetor Manual Choke p/n 350-1804 , Electric Choke p/n 350-1803

  • Specifications:

    Engine Make/Size
    Buick/Rover 215
    RPM Range
    Idle -5500
    Number Of Carbs
    Without EGR
    Cylinder Head Type
    Without EGR
    Basic Operating RPM Range
    Carburetor Quantity
    Engine Block Style
    Stock/OEM standard deck
    Intake Finish
    Intake Material
    Intake Section Included
    Intake Style
    Dual plane
    Sold individually
    Manufacturer's Part Number:

    Idle-5500 RPM Power!

    Performer manifolds are dual-plane, low-rise intake manifolds with a 180° firing order and a patented runner design that delivers outstanding performance. This patented design greatly improves torque over a wide rpm range, especially off-idle through 5500 rpm. Provides crisp throttle response.

    Note:To insure proper manifold to cylinder head sealing, Edelbrock recommends using an embossed intake gasket like Fel-Pro's Printoseal or Mr.Gasket's Ultra Seal. Fel-Pro's Perma Torque Blue and other similar gaskets do not compress well when used with an aluminum intake manifold and may cause vacuum leaks.
    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.


    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.