Items You Need
Important Installation Notes: This engine will require an EFI compatible fuel delivery system with a minimum pressure of 75 gph @ 60 PSI. Fuel pressure regulator with boost reference is required. Top of supercharger measures 20.83" from crank centerline. Intended for racing and engine swap applications. Not 50-state legal, Not intended for stock replacement.
Specifications:
- Displacement: 302 c.i.d.
- Horsepower: 785
- Torque: 660
- Compression: 9.5:1
- Engine Block: New Aluminum Ford
- Crankshaft: Forged
- Pistons: Mahle Forged Aluminum
- Connecting Rods: Manley Forged H-Beam
- Camshaft: Stock Ford
- Rocker Arms: Stock Ford 2:1 Ratio
- Induction: E-Force R2650 Supercharger System
- Cylinder Heads: Stock Four-Valve Aluminum with BOSS 302 Valve Springs
- Warranty: 2-year / Unlimited Mileage
ENGINE OIL: This crate engine is shipped dry without engine oil. Make sure to add the recommended Ford oil prior to priming the engine oil. The engine oil must be changed no more than 300 miles after break-in. A full synthetic SAE 5W-50 is highly recommended after the break-in period. Engine oil capacity is eight (8) quarts.
Will this engine fit a 2013 f 150 super cab automatic trans 6 speed 4 wheel dr? Do i need a new computer to run this engine or engine harness? Are there any other hardware needed to run this engine on the f 150?
Will this fit into a 2006 Lincoln Navigator with an automatic transmission.
Could this be made to fit a 1965 Ford Mustang ?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.