0
0
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories


Hi, ! (Not you?)
My Account
1-800-345-4545
Track Order
Help
Edelbrock 5002

Edelbrock Torker-Plus Camshaft & Lifter Kit for Small Block Chevy

350-5002

made in usa
Free Shipping Estimated to ship directly from the manufacturer on 12/26/18

$272.85
Edelbrock Torker-Plus Camshaft & Lifter Kit for Small Block Chevy $272.85
Out of stock
QTY
Torker-Plus Camshaft & Lifter Kit
  • 1957-1986 Small Block Chevy 283-400ci
  • Lift: .488''/.488"
  • Duration @ .050: 232°/234°
  • Advertised Duration: 292°/300°
  • 2500-6500 RPM Range
  • Edelbrock 5002 Details

    Chevy Small Block V8 262-400ci

    Operating Range2500-6500 RPM
    Duration Advertised292° Intake/300° Exhaust
    Duration @ .050''232° Intake/234° Exhaust
    Lift @ Valve.488'' Intake/.488'' Exhaust
    Lift @ Cam.325'' Intake/.325'' Exhaust
    Lobe Separation Angle108°
    Intake Centerline106°
    Intake Timing @ .050" Open 10° BTDC
    Close 42° ABDC
    Exhaust Timing @ .050" Open 47° BBDC
    Close 7° ATDC

    INSTALLATION NOTES:
  • Do not use late model timing chain and gear sets that are designed for emission-controlled engines. They are machined in a retarded position and are not recommended for this camshaft installation. Use Performer-Link Timing Chain Gear Set 350-7800 or Accu-Drive 350-7890.
  • Do not use dual valve springs. Use recommended Edelbrock valve springs 350-5703.
  • Use stock ratio rocker arms only.

  • Specifications:

    Exhaust Valve Lift (in.)
    0.488
    Intake Valve Lift (in.)
    0.488
    Int. Duration @ .050 in. (Deg)
    232
    Exh. Duration @ .050 in. (Deg)
    234
    Int. Duration Advertised (Deg)
    292
    Exh. Duration Advertised (Deg)
    300
    Engine Make/Size
    Chevy Small Block (262-400)
    Lifter Type
    Hydraulic Flat Tappet
    Usage
    Street/Performance
    RPM Range
    2000-9000
    Gaskets Included
    No
    Advertised Duration
    292 int./300 exh.
    Advertised Exhaust Duration
    300
    Advertised Intake Duration
    292
    Assembly Lubricant Included
    Yes
    Basic Operating RPM Range
    2,500-6,500
    Cam Style
    Hydraulic flat tappet
    Computer-Controlled Compatible
    No
    Duration at 050 inch Lift
    232 int./234 exh.
    Exhaust Duration at 050 inch Lift
    234
    Exhaust Valve Lift with Factory Rocker Arm Ratio (
    0.488
    Intake Duration at 050 inch Lift
    232
    Intake Valve Lift with Factory Rocker Arm Ratio (i
    0.488
    Lifter Style
    Hydraulic flat tappet
    Lifters Included
    Yes
    Locks Included
    No
    Pushrods Included
    No
    Quantity
    Sold as a kit
    Retainers Included
    No
    Rocker Arms Included
    No
    Timing Chain and Gears Included
    No
    Valve Lift with Factory Rocker Arm Ratio
    0.488 int./0.488 exh.
    Valve Springs Included
    No
    Valve Springs Required
    Yes
    Valve Stem Seals Included
    No
    Lobe Separation (Deg)
    108
    Manufacturer's Part Number:
    5002

    2500-6500 RPM Power!

    The cast aluminum Edelbrock Torker-II intake manifolds produced for Chevy powered high performance vehicles have a low profile, single plane design that provides adequate throttle response and horsepower gains at high rpm. Since these manifolds are designed with a low carburetor pad height they are ideal on applications with limited hood clearance. These high performance intake manifolds do not have provisions for emissions equipment and should not be used if fuel mileage is a primary concern. The Torker-II design produces tire smoking smiles per gallon!

    Items You Need

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.