0
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories


Hi, ! (Not you?)
My Account
Track Order
Help
Contact Us
Edelbrock 7122

Edelbrock Performer RPM Camshaft Kit for Small Block Ford 289-302

350-7122

made in usa
Free Shipping Ships

$278.15
Edelbrock Performer RPM Camshaft Kit for Small Block Ford 289-302 $278.15
QTY
Performer RPM Camshaft Kit
  • Small Block Ford 289-302ci
  • Lift: .496''/.520
  • Duration @ .050: 224°/234°
  • Advertised Duration: 290°/300°
  • 1500-6500 RPM Range
  • Edelbrock 7122 Details

    Ford


    *Not for 1985 & later engines with roller lifters.

    Operating Range1500-6500 RPM
    Duration Advertised290° Intake/300° Exhaust
    Duration @ .050''224° Intake/234° Exhaust
    Lift @ Valve.496'' Intake/.520'' Exhaust
    Lift @ Cam.310'' Intake/.325'' Exhaust
    Lobe Separation Angle112°
    Intake Centerline107°
    Intake Timing @ .050" Open 5° BTDC
     Close 39° ABDC
    Exhaust Timing @ .050" Open 54° BBDC
     Close 0° ATDC
    Vacuum @ 1000RPM Idle11"

    INSTALLATION NOTES:
  • Do not use late model timing chain and gear sets that are designed for emission-controlled engines. They are machined in a retarded position and are not recommended for this camshaft installation. Use Performer-Link Timing Chain Gear Set 350-7820 (1965½72-1/2) or 350-7811 (1973½90). Accu-Drive gear drive 350-7892 may also be used.
  • Do not use dual valve springs. Use recommended Edelbrock valve springs 350-5792.
  • Screw-in studs, guideplates and adjustable rocker arms required.
  • Use stock ratio rocker arms only.

  • Specifications:

    Intake Valve Lift (in.)
    0.496
    Exhaust Valve Lift (in.)
    0.52
    RPM Range
    1000-7000
    Int. Duration @ .050 in. (Deg)
    224
    Exh. Duration @ .050 in. (Deg)
    234
    Int. Duration Advertised (Deg)
    290
    Exh. Duration Advertised (Deg)
    300
    Lifter Type
    Hydraulic Flat Tappet
    Usage
    Street/Performance
    Engine Make/Size
    Ford 260-302
    Gaskets Included
    No
    Lobe Separation (Deg)
    112
    Advertised Duration
    290 int./300 exh.
    Advertised Exhaust Duration
    300
    Advertised Intake Duration
    290
    Assembly Lubricant Included
    Yes
    Basic Operating RPM Range
    1,500-6,500
    Cam Style
    Hydraulic flat tappet
    Computer-Controlled Compatible
    No
    Duration at 050 inch Lift
    224 int./234 exh.
    Exhaust Duration at 050 inch Lift
    234
    Exhaust Valve Lift with Factory Rocker Arm Ratio (
    0.52
    Intake Duration at 050 inch Lift
    224
    Intake Valve Lift with Factory Rocker Arm Ratio (i
    0.496
    Lifter Style
    Hydraulic flat tappet
    Lifters Included
    Yes
    Locks Included
    No
    Pushrods Included
    No
    Quantity
    Sold as a kit
    Retainers Included
    No
    Rocker Arms Included
    No
    Timing Chain and Gears Included
    No
    Valve Lift with Factory Rocker Arm Ratio
    0.496 int./0.520 exh.
    Valve Springs Included
    No
    Valve Springs Required
    Yes
    Valve Stem Seals Included
    No
    Manufacturer's Part Number:
    7122

    For high-performance street applications, Performer RPM Camshafts provide power from 1500 to 6500 RPM. These flat-tappet hydraulic lifter cams are dyno matched to Edelbrock's Performer RPM Manifolds for high-RPM horsepower while maintaining acceptable low-end torque. With 10-12 inches of manifold vacuum at idle, these cams have more lift and duration than most street cams.

    *Lifters included

    Does Edelbrock 7122 fit your vehicle?

    Narrow Results
    Filter By Year
    Filter By Make
    Filter By Model
    Filter By SubModel
    Filter By EngineType
    Filter By CC
    Filter By Liter
    Filter By Aspiration

    1977-1978 FORD LTD II

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BROUGHAM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1985-1992 FORD F-250

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: XLT LARIAT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1983-1988 MERCURY COUGAR

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: LS
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1975 FORD E-100 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1996-2000 FORD EXPLORER

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: LIMITED
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1984-1986 FORD THUNDERBIRD

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: ELAN
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1984 LINCOLN MARK VII

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: LSC
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1967 MERCURY COMMUTER

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1979-1982 FORD E-250 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: CHATEAU
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1975 FORD E-350 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: NORTHLAND
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1968-1972 FORD GALAXIE 500

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1965-1967 FORD RANCHERO

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1975-1981 FORD F-150

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: RANGER XLT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1976-1978 FORD F-350

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: G
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1968-1974 MERCURY MONTEGO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1983-1988 FORD THUNDERBIRD

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: SPORT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1979-1982 FORD E-150 ECONOLINE CLUB WAGON

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1983 FORD E-100 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: XL
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1956-1957 FORD CLUB

    • CC: 4786
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: V8 ( 4.8 L / 292 )

    1968-1971 FORD RANCHERO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1975-1978 FORD F-350

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1982-1983 FORD F-100

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: XLT LARIAT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1984-1985 FORD THUNDERBIRD

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: FILA
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1977-1978 FORD F-250

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: RANGER XLT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1986 MERCURY GRAND MARQUIS

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: COLONY PARK
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1978-1981 FORD THUNDERBIRD

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: TOWN LANDAU
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1968-1969 FORD FAIRLANE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1969-1974 FORD E-100 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: CLUB WAGON
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1971-1972 FORD E-200 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: CHATEAU WAGON
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1981 FORD THUNDERBIRD

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: HERITAGE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1968-1974 FORD TORINO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1968-1972 FORD CUSTOM

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1967-1968 OMEGA OMEGA

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1992-1996 FORD E-150 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1962 MERCURY COMMUTER

    • CC: 4786
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: V8 ( 4.8 L / 292 )

    1980-1981 FORD F-250

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: RANGER LARIAT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1999-2000 FORD EXPLORER

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: XLS
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1968-1970 FORD FALCON

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: FUTURA
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1984-1986 FORD E-250 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1978-1981 FORD F-100

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: RANGER LARIAT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1985-1992 FORD F-150

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: XLT LARIAT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1955-1956 FORD CUSTOMLINE

    • CC: 4786
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: V8 ( 4.8 L / 292 )

    1968 FORD GT40

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • EngineType: ALL
    • SubModel: MK III

    1977 FORD F-350

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: XLT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1958-1960 FORD VICTORIA

    • CC: 4786
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: V8 ( 4.8 L / 292 )

    1980-1981 FORD F-250

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: RANGER
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1986-1987 LINCOLN MARK VII

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • EngineType: ALL
    • SubModel: BILL BLASS

    1975-1977 FORD BRONCO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • EngineType: ALL
    • SubModel: ALL

    1956-1961 FORD FAIRLANE

    • CC: 4786
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: V8 ( 4.8 L / 292 )

    1986-1987 LINCOLN MARK VII

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • EngineType: ALL
    • SubModel: BASE

    1979-1982 FORD E-150 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1982 FORD F-150

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: XLT LARIAT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1973-1974 FORD RANCH WAGON

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1974 FORD GRAN TORINO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: ELITE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1963-1967 FORD RANCH WAGON

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1975 FORD E-100 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: NORTHLAND
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1977-1979 MERCURY COUGAR

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1966-1968 FORD BRONCO

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1972-1974 FORD GRAN TORINO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: SQUIRE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1975-1981 FORD F-100

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: RANGER
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1967 FORD RANCHERO

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.7
    • SubModel: 500 XL
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1967-1968 OMEGA OMEGA

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1975 FORD E-150 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: NORTHLAND
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1969-1970 TVR TUSCAN

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1963 MERCURY COUNTRY CRUISER

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1983-1996 FORD E-150 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: XL
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1968 MERCURY MONTEGO

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1972-1974 FORD GRAN TORINO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: SPORT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1995-1996 FORD F-150

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: EDDIE BAUER
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1975-1979 FORD F-150

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1983-1984 FORD F-250

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: XLT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1983-1988 FORD THUNDERBIRD

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: LX
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1977-1979 FORD RANCHERO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: 500
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1980 FORD F-350

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: RANGER LARIAT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1969 FORD COUNTRY SEDAN

    • CC: 4949
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1955-1957 FORD SUNLINER

    • CC: 4786
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: V8 ( 4.8 L / 292 )

    1979 FORD THUNDERBIRD

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: HERITAGE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1974 FORD BRONCO

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1968-1969 MERCURY COUGAR

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: XR-7
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1955 MERCURY CUSTOM

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • EngineType: ALL
    • SubModel: ALL

    1979-1980 FORD E-250 ECONOLINE CLUB WAGON

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1958-1962 FORD COUNTRY SEDAN

    • CC: 4786
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: V8 ( 4.8 L / 292 )

    1964-1967 FORD FALCON

    • CC: 4727
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.7
    • SubModel: BASE
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1979-1982 FORD E-100 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: BASE
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1959-1960 EDSEL RANGER

    • CC: 4786
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: V8 ( 4.8 L / 292 )

    1979-1983 FORD E-100 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1961 FORD GALAXIE

    • CC: 4786
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.8
    • SubModel: TOWN VICTORIA
    • CUI: 292
    • EngineType: V8 ( 4.8 L / 292 )

    1970 FORD E-300 ECONOLINE

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: CHATEAU WAGON
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1977-1978 FORD F-250

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: NORTHLAND
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1975-1978 FORD F-350

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: NORTHLAND
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1979-1980 FORD E-350 ECONOLINE CLUB WAGON

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: CUSTOM
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1984-1985 FORD MUSTANG

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: GT
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1958-1962 FORD COUNTRY SQUIRE

    • CC: 4786
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: V8 ( 4.8 L / 292 )

    1964-1967 FORD FALCON

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.7
    • SubModel: FUTURA
    • CUI: 289
    • EngineType: V8 ( 4.7 L / 289 )

    1975-1978 FORD MUSTANG II

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: MACH I
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1975-1978 FORD F-350

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: RANGER
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1978-1979 MERCURY ZEPHYR

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: Z7
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1995-1996 FORD F-150

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • SubModel: SPECIAL
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    1957 FORD COUNTRY SQUIRE

    • CC: 4786
    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 4.8
    • SubModel: BASE
    • CUI: 292
    • EngineType: V8 ( 4.8 L / 292 )

    1980-1982 FORD F-150

    • Fitment_Note: Not For 1985 And Later Engines w/Roller Lifters~Designed For The Engine Swap Market~Not Legal For Use On Pollution Controlled Vehicles~Produces 367hp and 304ft.-lbs. When Matched w/7121 Manifold and 60259 Heads~Screw-In Studs/Guide Plates/Adj. Rocker Arms Required~Idle Vacuum at 1000 RPM - 11 inch
    • Liter: 5.0
    • Aspiration: N
    • SubModel: CUSTOM
    • Engine Vin: F
    • CUI: 302
    • EngineType: V8 ( 5.0 L / 302 )

    Items You Need

    *Not legal for sale or use on pollution-controlled motor vehicles
    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.