Designed for Edelbrock nitrous systems, these stainless steel solenoids have a very low amp draw. They feature a stainless steel base for corrosion resistance and tighter tolerances, a low current-consumption coil, a PTFE plunger for reliability and longevity, and a powder-coated coil cover for durability and appearance.
The Victor Pro nitrous solenoid is perfect for racers because the bottom outlet design restricts flow much less then a standard design solenoid. This feature, combined with a .115" internally drilled metering orifice, make this Edelbrock's highest flowing nitrous solenoid. The Victor Pro fuel solenoid features a shorter body with a smaller diameter stainless steel base for use where space is limited. Important note about Amp Draw: All ratings listed below are under a load condition (for example: 950 psi nitrous and a minimum of 6 psi fuel pressure).
Nitrous Solenoids - Amp Draw: 9.2 amps @ 12.6 volts and 11 amps @ 13.8 volts
Fuel Solenoids - Amp Draw: 1.29 amps @ 12.6 volts and 1.5 amps @ 13.8 volts
**Please note that other manufacturers may list amp draw under a "no load" condition which is not realistic.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.