800.345.4545
Unrivaled Customer Service
And Expert Tech Advice!  
FREE SHIPPING!
Same Day Shipping Before 11 PM ET
0
My Cart
0
$0.00
Shop By Vehicle
Shop By
Category
Close Menu
Shop By Vehicle
Top Categories
All Categories

Top Categories

All Categories


Free Catalog
E-Mail Signup
My Account
Track Order
Gift Certificates
Rebates
Help

Flowtech 33500

Long Tube Headers

Flowtech 33500

387-33500

made in usa
jegs shipping
FREE Shipping
Estimated to ship directly from the manufacturer on 05/29/18
Easy Returns
Easy Returns
Lowest Price Guarantee
Lowest Price Guarantee
Flowtech 33500 Long Tube Headers $356.95
Long Tube Headers
  • Chrysler 273-360
  • 1972-1993 Dodge 1/2-Ton & 3/4-Ton 2WD/4WD
  • 1974-1993 Ramcharger/Trailduster 4WD
  • 1.625'' Tube
  • 3'' Collector
  • Ceramic Coated

  • Flowtech 33500 Details

    Dodge/Mopar Trucks

    Footnotes:
  • Must modify stock exhaust to retain catalytic converters.
  • Will not fit vehicles equipped with A.I.R. Injection missions pump.
  • Will fit with AC.
  • Will not fit with high torque starter.
  • Automatic transmission column shift only.
  • Manual Transmission floor shift only.
  • 2WD Collector is a non-flanged integral reducer type.
  • 4WD Will not fit trucks with power take off.

    Installation Notes
    Breaking in an engine with ceramic coated Headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated Headers require several heat cycles to fully cure before they will withstand extreme heat. FlowTech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. The use of header wraps can cause the header tubes to crack or rust due to excessive heat and moisture build-up. FlowTech does not recommend the use of header wraps as this will void the warranty.

  • Specifications:

    Engine Make/Size
    Mopar 318-360
    Material
    Mild Steel
    Coating/Finish
    Metallic Ceramic
    Collector Tube Size (in.)
    3
    Application
    Automotive
    Tube Diameter
    1.625
    Port Shape
    Round
    Tube Direction
    Down Swept
    Gaskets Included
    Yes
    Header Finish
    Silver ceramic coated
    Header Material
    Steel
    Header Style
    Full-length
    Motor Mounts Included
    No
    Tuned
    No
    Bolts/Studs Included
    Yes
    Catalytic Converter(s) Included
    No
    Cross Over Pipe Included
    No
    Reducers Included
    Yes
    Transmission Mount Included
    No
    Weld-Up
    No
    Primary Tube Diameter (in.)
    1 5/8
    Quantity
    Sold as a pair
    Primary Tube Gauge
    18-gauge
    Flange Style
    Standard
    Collector Attachment
    3-bolt flange
    Collector Diameter (in.)
    2.5
    Finish
    Silver Metallic Ceramic
    Tube Size
    1.625
    Manufacturer's Part Number:
    33500

    Performance Plus Fuel Economy at a Price You Can Afford!

    FlowTech headers are made of 16-gauge tubing that's welded to O-ring port exhaust flanges on one end and mandrel-formed collectors on the other. You get a premium performance-minded design with a budget-minded attitude!

    Features

    • 16-gauge (.049" thick) cold-rolled mild steel (except stainless steel were noted)
    • Precision engineered for performance, fuel economy, and fit
    • Mandrel-formed plenum increases flow for more power
    • Leakproof O-ring port seals quality tested by FlowTech
    • Finished with black paint or ceramic coating, polished available for some applications

    Does Flowtech 33500 fit your vehicle?

    Narrow Results

    1976-1978 DODGE W200 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975-1977 DODGE W100 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 6.6
    • SubModel: CUSTOM
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1975-1976 DODGE D200 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: CUSTOM
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1974 DODGE W200 PICKUP

    • CC: 6556
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1977 DODGE W150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • EngineType: ALL
    • SubModel: ALL

    1975-1979 DODGE D100 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: CUSTOM
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1981-1993 DODGE D250 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1981 PLYMOUTH TRAILDUSTER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • SubModel: ALL
    • EngineType: ALL

    1981-1988 DODGE W250 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • EngineType: ALL
    • SubModel: ALL

    1989-1991 DODGE W150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1979 DODGE D100 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: WARLOCK II
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1975-1977 DODGE W100 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: CUSTOM
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1975-1980 DODGE RAMCHARGER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: SE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1981-1982 DODGE D250 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1974 DODGE D100 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: T
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1975-1980 DODGE RAMCHARGER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: SE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1976-1978 DODGE D100 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: WARLOCK
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1974 DODGE D100 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: Y
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1974 DODGE D100 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1979 DODGE D100 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: WARLOCK II
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1985 DODGE W150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: W
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1974 DODGE W200 PICKUP

    • CC: 7212
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1984 DODGE D150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: W
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1974 DODGE D200 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: Y
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1989-1993 DODGE W250 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1978 DODGE W150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1989-1993 DODGE W150 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1986-1987 DODGE W150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1988 DODGE W100 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • EngineType: ALL
    • SubModel: ALL

    1974 DODGE RAMCHARGER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1974-1980 PLYMOUTH TRAILDUSTER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1981-1993 DODGE RAMCHARGER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • SubModel: ROYAL SE
    • EngineType: ALL

    1975-1979 DODGE D100 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: CUSTOM
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1980 DODGE RD200 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • EngineType: ALL
    • SubModel: ALL

    1982 DODGE D150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: T
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1972-1974 DODGE W100 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1984-1989 DODGE D100 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: CUSTOM
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1972-1973 DODGE D200 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1974 DODGE W100 PICKUP

    • CC: 6556
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1977-1980 DODGE D200 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1993 DODGE W150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1984-1985 DODGE RAMCHARGER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1976-1978 DODGE D100 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: WARLOCK
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1984 DODGE W150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1975-1979 DODGE RAMCHARGER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1977-1993 DODGE D150 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1972-1974 DODGE D100 PICKUP

    • CC: 5212
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1989-1993 DODGE W250 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1986-1987 DODGE W100 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: CUSTOM
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1977-1980 DODGE D200 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1975-1976 DODGE D200 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: CUSTOM
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1984-1988 DODGE D100 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: CUSTOM
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1991 DODGE W150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: S
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1975-1978 DODGE W200 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 7.2
    • SubModel: BASE
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1985-1991 DODGE D150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1972-1973 DODGE W200 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1978-1987 DODGE W150 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1975-1977 DODGE W100 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 7.2
    • SubModel: CUSTOM
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1990-1991 DODGE W150 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: S
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1991-1992 DODGE RAMCHARGER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: Z
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1991-1993 DODGE RAMCHARGER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • SubModel: CANYON SPORT
    • EngineType: ALL

    1972-1973 DODGE D100 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1972-1974 DODGE W100 PICKUP

    • CC: 5212
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1982 DODGE D150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: MISER
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1988 DODGE W150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • EngineType: ALL
    • SubModel: ALL

    1972-1974 DODGE D200 PICKUP

    • CC: 5212
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1978-1981 DODGE W150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1984-1993 DODGE D250 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1974-1980 DODGE W200 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1986-1988 DODGE RAMCHARGER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: W
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1977-1981 DODGE D150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1974 DODGE W100 PICKUP

    • CC: 7212
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 7.2
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: D
    • CUI: 440
    • EngineType: V8 ( 7.2 L / 440 )

    1978 DODGE W150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 6.6
    • SubModel: BASE
    • CUI: 400
    • EngineType: V8 ( 6.6 L / 400 )

    1982-1983 DODGE D150 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: MISER
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1986-1987 DODGE W100 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: CUSTOM
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1990-1991 DODGE D150 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: S
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1974 DODGE D200 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1975-1980 DODGE W200 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1980-1981 DODGE RAMCHARGER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1974-1980 PLYMOUTH TRAILDUSTER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1993 DODGE RAMCHARGER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1989 DODGE W100 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: CUSTOM
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1972-1974 DODGE W200 PICKUP

    • CC: 5212
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1974-1993 DODGE RAMCHARGER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: BASE
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1975-1977 DODGE W100 PICKUP

    • CC: 5211
    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.2
    • SubModel: CUSTOM
    • CUI: 318
    • EngineType: V8 ( 5.2 L / 318 )

    1974 DODGE D200 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • Aspiration: N
    • SubModel: BASE
    • Engine Vin: T
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1989-1990 DODGE RAMCHARGER

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )

    1993 DODGE D150 PICKUP

    • Fitment_Note: w/Oxy. Sensor- Use Reducer PN[10105FLT] For 2.5 in Flange~Will Not Fit w/A.I.R. Injection Pump~Will Not Fit w/Power Take Off~Will Not Fit w/High Torque Starter~w/Oxy. Sensor - Use Reducer PN[10110FLT] For 3 in. Flange
    • Liter: 5.9
    • SubModel: BASE
    • CUI: 360
    • EngineType: V8 ( 5.9 L / 360 )
    33500 is rated 1.0 out of 5 by 1.
    Rated 1 out of 5 by from Header fit Well headers sometimes don't fit the bill so to speak, these do not fit the bill. Major clearance issues on the drivers side, resulting in warranty void for sure. Manipulation of tubes for starter and frame clearance. Put many sets on and these are definitely not the best. I'll just build my own next time it'll be more glo
    Date published: 2015-09-10
    • y_2018, m_5, d_25, h_5
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_10001_10001_346836, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs
    Items You Need
    Some parts are not legal for use in California or other states with similar laws / regulations