5-Point Individual Type Harness
The belts of the G-Force Pro Series Racing Harnesses are constructed of a PolyTeck low-stretch webbing that outperforms other harnesses in safety and comfort. All Pro Series harness sets have speed tabs for easy release and grip rolls for tensioning, allowing simple adjustment even while suited up with a helmet restraint. G-Force Pro Series belts all feature a SFI rating of 16.1 with the exception of the Nascar style belts which are SFI 16.5 rated. Only G-Force uses 3 in. wide bolt-end hardware instead of the standard 2 in. used by other manufacturers. At the point of failure, 3 in. hardware withstands almost 2,000 pounds more than 2 in. hardware.
4-Point 5-Point 6-Point
V-Type Individual Individual
- All: Lap Pull-Down 38" to 67"/Lap Pull-Up 38" to 80"
- All: Sub-Strap 7" to 25"
- 4-Point Shoulder: 26" to 34"
- 5 and 6-Point Shoulder: 26" to 50"
Note: "Pull-Up" and "Pull-Down" indicate the direction that tightens lap belt adjusters. For example, a pull-up lap belt adjuster is best for dragsters because it is easier and safer to tighten belts upward (towards the Latch & Link) rather than downward in such a small cockpit.
JEGS Easy Kits are designed by JEGS professionals so you get all the parts you need.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.