0
0
×
Account Login
1-800-345-4545
Gift Cards
Track Order
Help Center
PRODUCT DISCONTINUED

JEGS Street Performance Transmission Package TH700-R4

555-60320K

JEGS

Product Q&A
View Now
Click image to zoom
Street Performance Transmission Package TH700-R4
Street Performance Transmission Package
  • TH700-R4
    Includes:
  • Transmission
  • Cooler
  • Hose
  • Torque Converter
  • Dipstick
  • Transmission Fluid
  • Mounting Hardware
    • Currently unavailable.
    This product is not available, please call customer service for options, at 1-800-345-4545.

    I have a 70 Chevy C10 shirt narrow. I have installed a 2004R in it but it burned up at 250 miles. Has a floor shifter. Modified drive line. Has a 355 450 HP pro-street engine. Will a 700R4 work? Does it have the same rear spline? I have a lockout kit. 

    Asked by: LGR58
    The 200R4 and the 700R4 have the same 27 spline output shaft and the 700R4 is a better transmission.
    Answered by: Rusty B
    Date published: 2018-08-16

    Will this fit my 1968 LeMans? It has a 400ci and 2spd powerglide.

    Asked by: 68maniac
    Yes, if this is a Chevy engine, you will still need to fabricate some of the accessories.
    Answered by: Rusty B
    Date published: 2019-03-28

    I have a 1984 GMC 1 Ton Van with a 350 5.7L Engine and a 3-speed auto. will this trans swap and if so does the drive shaft need to be modified and if lockup wiring kit is needed which one should be used?

    Asked by: Cjizmoeso
    We would only recommend this transmission if you are replacing a 700R4. You may need to modify the transmission tunnel depending on the transmission being used now.
    Answered by: Rusty B
    Date published: 2019-01-10

    What horsepower will this unit stand 

    Asked by: CBGREEN
    This is made to work with up to 450 HP.
    Answered by: Rusty B
    Date published: 2018-06-26

    will this transmission work in a 56 chevy if so what would i need to make the swap i have a 4 speed manual now

    Asked by: bethel
    It will depend on the engine you are using. You will need a flexplate and will need to fabricate a crossmember and have a driveshaft made.
    Answered by: Rusty B
    Date published: 2018-07-04

    WILL THIS WORK IN 72 C10 WITH 454

    Asked by: DANPBG
    Yes, you will have to add a transmission controller (cable) to make this work properly.
    Answered by: Rusty B
    Date published: 2018-05-25

    I need to change the trans in my 71 C10 with a 305 out of an 83. I think this will work, right? The shifter is on the floor out of a 2000 Bravada so I already reversed the mount.

    Asked by: keithL
    You just want to match the transmission with your engine to keep the swap simple.
    Answered by: Rusty B
    Date published: 2018-04-04

    can you recommend a flex plate? do I need a lock up control?

    Asked by: Eric D
    This will depend on the engine you have - here is a link to all flexplates - http://www.jegs.com/p/JEGS-Performance-Products/JEGS-Heavy-Duty-SFI-Flexplates/2867869/10002/-1
    Answered by: Rusty B
    Date published: 2018-03-26
    • y_2024, m_4, d_23, h_5CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_19
    • loc_en_US, sid_10001_10001_4948248, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Items You Need

    Recently Viewed

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.

    Tools:

    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.