JEGS
Torque Converter for Ford C4 [10 in. Dia. & 2300-2500 RPM Stall Speed]
555-60407
Product Q&A
View Now
![Torque Converter for Ford C4 [10 in. Dia. & 2300-2500 RPM Stall Speed]](http://www.jegs.com/images/photos/500/555/555-60407.jpg "Torque Converter for Ford C4 [10 in. Dia. & 2300-2500 RPM Stall Speed]")
Items You Need
Ford C4
JEGS 555-60407 Torque Converter Notes:
Converter diameter may vary based on Core Availability
For Big Block applications, use JEGS XHD Converters
| Performance Torque Converter General Application Chart * | |||
| Advertised Camshaft Duration | Rear Gear Ratio | Engine RPM Range & Compression Ratio | Converter RPM Stall Speeds ** |
| Stock to 260° | Stock to 3.23 | 1000-4600 8 to 9.5 | 1500 to 1700 |
| Stock to 265° | Stock to 3.23 | 1400-5000 8 to 9.5 | 1600 to 1800 |
| 265° to 280° | 3.00 to 3.73 | 1600-6000 9.5 to 10.5 | 2200 to 2400 |
| 280° to 300° | 3.55 to 4.56 | 2000-6500 9.5 to 11 | 3000 to 3400 |
| 280° to 310° | 3.73 to 4.88 | 2800-7000 10 to 11.5 | 3500 to 3800 |
| 290°+ | 3.73+ | 3400-8000 10.5 to 12 | 3500+ |
* This chart is a guideline. The stall speed may vary in your application.
** Recommended for use with Small Block engines only
FAQ
What is the best stall speed for torque converter?
- The ideal stall speed depends on your vehicle's specs and usage.
- Consider factors like engine torque, weight, and intended application.
How do I know what stall torque converter I need?
- Determine your engine's torque output.
- Match it with a converter's stall speed range.
- Choose based on your vehicle's weight and usage.
What does a 2500 RPM stall converter do?
- A 2500 RPM stall converter allows higher RPM before engaging.
- Improves launch performance and overall drivability.
What is the typical torque converter at stall speed?
- Stall speed varies but is typically around 2500 RPM.
- Check specifications for accurate details.
Specifications:
Will this work with a th350 “bop” trans behind a 307small block
Does this fit a C4 with a 1971 302ci
Will this fit 1966 mustang C-4 trans
The torque converter i have has been on a 50 mile drive , should i replace the pump seal if i replace the torque converter with this one ? It looks fine.
Is this like a refurbished b&m tour converter?
What is the thread pitch for the flywheel studs?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.