JEGS
Universal Marine Electric Fuel Pump 12V [6-8 PSI, 72 GPH]
555-159068
Product Q&A
View Now
![Universal Marine Electric Fuel Pump 12V [6-8 PSI, 72 GPH]](http://www.jegs.com/images/photos/500/555/555-159068.jpg "Universal Marine Electric Fuel Pump 12V [6-8 PSI, 72 GPH]")
Items You Need
| Ratings |
|---|
| Price |
| Brand |
Marine Fuel Pump
JEGS 555-159068 Marine Universal Electric Fuel Pump always delivers fuel at the correct pressure and flow rate that each specific application demands. These units are manufactured using all new components and endure meticulous quality control and testing procedures to provide a fuel pump that gives you optimum performance and long life.
JEGS 555-159068 Universal Marine Electric Fuel Pump Includes:
- (1) Fuel Pump
- (1) Mounting Bracket
- (2) 3/8 in. Hose Barb x 1/4 in.-18 NPT Male Thread Fittings with 5/8 hex for tightening
- (3) 5/16 in. - 18 Thread x 3/4 x 1/2 in. hex Bolts
- (3) 5/16 in. - 18 Thread x 1/2 in. hex nuts
- (3) 10 -32 Thread x 3/8 hex nuts
- (3) 3/16 in. ID x 1/2 in. OD Flat Washers
- (3) 5/16 in. ID x 5/8 in. OD Flat Washers
- (3) 3/8 in. ID x 1/2 in. OD Split (Lock) Washer
- (3) 3/16 in. ID x 5/16 in. OD Split (Lock) Washer
- (4) 1/2 in. Spring Clamps
- (2) 3/8 in. Spring Clamps
- (1) Spring Clip
- (3) Vibration dampers (for mounting)
- (2) 14-Gauge wire leads with 1/4 in. female post connectors (ground lead has 5/16 pre-assembled ring terminal)
JEGS 555-159068 Universal Marine Electric Fuel Pump Dimensions:
- Inlet: 1/4 in.-18 NPT Female Thread
- Outlet: 1/4 in.-18 NPT Female Thread
- Pump Housing Diameter: 2 3/8 in.
- Pump Housing Height: 4 in.
- Overall Width: 3 3/8 in.
- Overall Height: 4 1/4 in.
JEGS 555-159068 Universal Marine Electric Fuel Pump Mounting Bracket Dimensions:
- Bracket Width: 3 3/16 in.
- Bracket Height: 3 7/16 in.
- Fuel Pump Mounting Pattern: 2 1/4 in.
- Bracket Mounting Center to Center: 1 3/4 in. & 2 3/8 in.
Specifications:
Do I need a pressure regulator for a 1973 corvette 350 with single 4 barrel carburetor
Made in USA or China ???
Do I need a regulator for this electric fuel pump I have a 79 Ford F-150 carburetor
Dose this pump like pulling or pushing fuel
Can you mount this upside down, with the wire connectors facing up?
Is y there a height restriction on mounting location
How much current does this pump draw? What size fuse should I use regarding the fuse amperage? Thanks for your time….Paul
Will this pump work with diesel fuel?
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.