JEGS 600 CFM Street Carburetor, Vacuum Secondary [Manual Choke, Matte Black]
555-16710
Items You Need
Ratings |
---|
Price |
Brand |
600 CFM Matte Black
JEGS 555-16710 600 CFM Street Carburetor with Manual Choke
The JEGS 555-16710 600 CFM 4-Barrel carburetor is an ideal upgrade for your street vehicle's stock or mildly built engine. The durable fuel-safe matte black powder-coated finish will stand out in your engine bay while protecting the aluminum from corrosion.
JEGS 555-16710 600 CFM Street Carburetor with Manual Choke Features:
This unit offers several features that are superior to other carburetors in the same price range.
- Etched JEGS Logo on each float bowl
- Comes pre-tuned and ready to run out of the box. Some fine-tuning may be necessary depending on your engine setup
- Manual Choke
- Float bowls with dual feed connections that allow you to plumb your fuel lines on either the left/driver or right/passenger sides
- The carburetor body and fuel bowl's come in a matte black powder-coated finish that provides excellent wear protection
- Linkage and bracketry come in a classic gold dichromate finish that provides superior corrosion resistance
- Brass center-hung floats
- Glass float level sites incorporated into each float bowl on left/driver and right/passenger sides allow for easy visibility when adjusting fuel levels
- Adjustable air bleeds in the body and metering block
- Power valve blow-out protection
- Uses standard 4160 components for easy rebuild
JEGS 555-16710 600 CFM Street Carburetor with Manual Choke Includes:
- (1) Base gasket
- (1) Air filter gasket
- (3) Vacuum plugs
- (2) Vent tubes
- (1) Installation Instructions
JEGS 555-16710 600 CFM Street Carburetor with Manual Choke Specifications:
- Main jets: #65 (0.065 in. Diameter)
- Rear metering plate: #63 jet equivalent (0.0625 in. Diameter)
- Power valve: 6.5 Hg (Inches of mercury)
- Accelerator pump: 30cc
- Needle and seats: High-flow 110
- Dual feed fuel bowl inlets are threaded on the right/passenger and left/driver sides to allow your choice of fuel line plumbing
- Fuel line inlet thread sizes:
- Carburetor body to fuel line: 9/16 in. -24 thread with 3/8 in. hose barb
- Dual-feed fuel inlet center-to-center spacing: 8 21/32 in.
Note: Keep track of your adjustments with this downloadable chart below.
Specifications:
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.