GM LS Series
JEGS 200579 Hydraulic Roller Camshaft for 1997-2015 GM LS GEN III/IV Engine is designed for GM car and truck applications with a three-bolt camshaft gear attachment and 1.7 ratio rocker arms. This camshaft is a good street/strip performance cam and provides great mid-range and superior top-end power. Requires custom ECU tuning.
Note: Compare to cam found in GM Crate Motor LSX376/525 and LS376/515 (GM Part #88958770)
Performance Roller Cams for Small Block Ford & GM LS Engines
JEGS Hydraulic roller cams are designed for 1989-1995 Small Block Ford 5.0L, 1987-2002 GM Small Block Chevy, and Select 1997-2015 GM LS-Series (Gen III/IV) engines with 3-bolt cam gear sprocket. These cams work with the OEM Hydraulic Roller Tappets & Retainers. Available as camshaft only (roller tappets not included) and kits including roller tappets and guides.
Will this Cam work with a card & a MSD controller?
Will this Cam work with a carb and a MSD controller
Can the GM Z06 valve springs be used with this cam? What is the RPM limit with this setup?
Would a 3000 stall with 3.73 gears work well with this cam? or would a 3500 be better
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.