JEGS 62828 Posi Traction limited-slip differential for use in 1957-2018 Cars/Trucks/Jeeps with Dana 44 front or rear differentials provides smooth aggressive traction on various terrains. This limited-slip unit is manufactured using a high-strength nodular case, forged 4320 chromoly spider gears, and Raybestos composite clutches for strength, durability, and long life. Whether you’re at the race track, off-roading, or enjoying a ride on the street you will experience unmatched positraction performance.
Technical Note: This limited-slip unit is doubled drilled for both 7/16 in. & 1/2 in. ring gear bolts. Must use YSPBLT-027 bolt spacer sleeve to work with 3/8 in. ring gear bolts. JEGS recommends the use of high-grade Non-Synthetic GL-5 gear oil 555-28054 and LSD (Limited-Slip Differential) additive 555-60120 for smooth operation and long life. The use of Synthetic oil is not recommended and may result in noisy or aggressive operation.
- Dana 44 Front, Standard Rotation
- Dana 44 Front, Reverse Rotation, Straight Axle
- Dana 44 Front, Disconnect Design, 2001 and older
- Dana 44 IFS (Independent Front Suspension) Front
- Dana 44 Rear, 30-spline
- Dana 44, TJ Rubicon Wrangler rear
- Dana 44, TJ Rubicon Wrangler front
- Dana 44 Rear, Non-Rubicon JK
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.