Account Login
Gift Cards
Track Order
Help Center

JEGS 32 Inch Ladder Bars


Product Q&A
View Now
Click image to zoom
32 Inch Ladder Bars
More than 10 available
Ladder Bars
  • Length: 32"
  • Made from 1" x 0.156" DOM tubing
  • Made in the USA
  • (2) Safety Loop Kits
  • (4) 3/16" Thick Steel Housing Brackets
  • (2) 3/4" Rod Ends
  • (4) 5/8" Rod Ends
  • Free Shipping - Ships

    Items You May Also Consider

    64670 is rated 4.0 out of 5 by 7.
    Rated 5 out of 5 by from Great improvement. Well made. Good power coating. Easy to install great improvement over leef springs. Makes U joint angle a simple adjustment. Improves ride as well.
    Date published: 2016-09-24
    Rated 4 out of 5 by from Well built Only issue I found was the threads in one of the bugs were burred. Had to chase them.
    Date published: 2021-03-22
    Rated 2 out of 5 by from Ladder bars Got these nice coating and hardware but the thread holes in the Ladder bars are bad need too tap them or chase them out I sent them back and ordered comp engineering
    Date published: 2018-07-21
    Rated 2 out of 5 by from Just OK These are a decent set of ladder bars for a street car but you'll need to have a 3/4" 16 die to chase the threads because the four 5/8" rod ends don't thread into the ladder bars. I guess jegs never tried to assemble a set of these bars.
    Date published: 2018-03-17
    • y_2023, m_9, d_26, h_3
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
    • cp_1, bvpage1
    • co_hasreviews, tv_3, tr_4
    • loc_en_US, sid_10001_10001_3131430, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    in the directions it says to install the crossmember first, this is not part of this kit? do you have to have a cross member?

    Asked by: raymo2019
    Answered by: Kenny U
    Date published: 2018-10-26

    are these ajstable ladder bars

    Asked by: jason holder
    Yes, these ladder bars are adjustable.
    Answered by: Rusty B
    Date published: 2018-06-25

    Would this work with my truck? 79' Chevy Pickup 4x4 14 bolt rear end.

    Asked by: ChevyPwr
    These are universal fit kits, but are not recommended for 4wd applications.
    Answered by: Rusty B
    Date published: 2018-05-10

    Can you get this ladder bar setup with polyurethane rod ends for the street

    Asked by: Marsh58
    We do not sell it with those, but you can change them out with a rod end of your choice.
    Answered by: Rusty B
    Date published: 2018-03-07

    Will the axle housing brackets fit a ford 8.8?

    Asked by: TannerFromArkansas
    Yes, they may need to modified slightly, but these will work on that application.
    Answered by: Rusty B
    Date published: 2018-07-28
    • y_2023, m_9, d_26, h_3CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.35
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_5
    • loc_en_US, sid_10001_10001_3131430, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_jegs

    Easy Kits

    Recently Viewed

    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.


    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.