32" x 8.5'
TO CLEAN: Mix a solution made of 3 parts water and 1 part liquid dish soap or laundry detergent. Simply mist with the mild liquid soap/water solution, hose off with water, allow to air dry and reuse. For a more thorough clean apply the washing solution on any soiled area found on the mat, let stand for 20 minutes then rinse off with a hose or use a Wet/Dry Shop vacuum, and allow to air dry.
Superior Protection for Every Surface
JEGS highly-absorbent Garage Mats minimize maintenance while protecting your floors and workspace from water damage and contaminants such as gas, oil, antifreeze, and salt.
These 1/2 in. thick Mats have the ability to absorb up to 4 cups of liquid for every 288 sq./in. and remain absorbent even when frozen. Withstanding temperatures as low as -50 degrees F and as high as 325 degrees F, your mat will never crack or de-laminate.
Each Mat's remarkable three-layer construction starts with a protective cotton-fiber cushion core layered between an extremely-absorbent top layer and a low-slip, leak-proof, grip backing.
Easily clean with soap and water or you can simply hose it off.
- Absorbs up to 4 cups of liquid per 288 sq./in. & serves as a vapor barrier
- Protects surfaces from contaminants, falling tools, heavy traffic & water
- Captures grease and oil allowing water to evaporate
- Lightweight for easy transport
- NO ASSEMBLY REQUIRED
- Various sizes available
- Embellished with the JEGS logo
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.