Jackshaft/Motor Plate Parts
Jackshaft plates are CNC machined from aluminum. The plate is pocket milled to reduce weight without sacrificing strength. The plate has slots for belt adjustment that are 2 1/2" long for a good selection of belts that will work well. Slots also allow the bearing block to move back and forth to adjust driven and sprocket location. Universal clamps are billet aluminum designed to fit 1 1/8" diameter tubing with a minimum 2 7/8" spacing. Bearing blocks are pocketed on under side for weight.
Jackshafts are made from ground and polished stress-proof material for high strength and bending resistance.
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.