- Jegs
- Ignition & Electrical
- Spark Plug Wire
- Spark Plug Wires
- MSD 8.5mm Super Conductor Spark Plug Wires
MSD Ignition Super Conductor 8.5mm Wires Red
121-32349

Acura/Honda
Applications:
Specifications:
The Ultimate Spark Plug Wire - Incredibly Low Resistance Without Electronic Interference
Universal Wire Sets
Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfectly, but a lot of people want to build their own so they can route them exactly how they see fit. Super Conductor Universal 8.5 mm Wire Sets have spark plug terminals and boots installed with the opposite ends open. Distributor cap terminals and boots are included so you can cut wires to desired lengths, then use the included Mini-Stripper-Crimper to install terminals. 2-in-1 Wire Sets include terminals and boots for both socket and HEI-style distributor caps. Bulk wiring is available in 50-foot lengths so you can build your own set.
Boot Key
Multi-Angle: Straight but can be bent close to 90 degrees
Socket: For old socket or points-style cap (female post)
HEI: 90 degrees for spark plug-type terminals (male post)
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.