Pro Flo Undercut Intake Valve Stem Design
Manley Performance is indisputably a leading manufacturer of performance and racing components in the world. The reason for Manley's overwhelming success is simple: Quality. Manley offers the best materials in the industry - exclusive materials that other manufacturers do not possess. Manley's valve stems are hard coated with .0002'' thick chrome rather than a few millionths of flash. Manley's hard valve tips are superior to competitors' puddled ''stellite'' which can crack and erode off the stem. Manley's valve head and under head shapes have been in the forefront of the quest for improved flow since the late 1960's.
Race Master and the Pro Flo versions identified as Race Flo valves, are manufactured of XH-426 material for the exhausts and NK-842 for the intakes. This series of valves is targeted at the bracket, drag and oval track racers operating below 8000 rpm - above which engine speed titanium valves are generally required. Any engine builder successfully using EV-8 alloy (21-4N) valves will find in this series of Manley valves a superior piece at a most attractive price. The Ultimate Tensile Strength charts on this page and the next, show the Manley Race Series to be equal to the best that the competitors have to offer.Features:
I have a ls2 with l92 heads, and thinking of an asa cam or something with a little more lift, what valve springs would you recommend with these valves?
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.