QA1 Aluminum Small Body Shock Valving (Comp-Rebound): 2-2
122-8262
Specifications:
QA1's 82 Series shock is just like the large body twin tubes, but smaller. Every internal component is of the same design as the large body shocks, just scaled down. The 1-5/8" outside body diameter allows these shocks to fit where large bodies cannot fit. !
Features:
Have 10 minutes? That's all it takes. Easy-to-follow instructions can give you the performance edge.
Incorporates dual bleed circuits for standard or custom valvings, including extreme split valvings.
Tuneable to standard or custom valvings.
QA1 uses a premium proprietary blend of specially engineered oil to prevent fade.
Precision surface eliminates piston rod flex, increasing valving consistency.
Damping curve allows for complete control of suspension at low shaft speeds without creating extreme forces at high shaft velocities.
The outer tube can get dented without binding the shock.
Over 10% lighter than the market leader's small body aluminum shocks! 40% lighter than full size shocks! Forged 6061-T6 aerospace quality aluminum, machined for longevity and strength.
Can be mounted upside down with no change in rate to reduce unsprung weight.
Motor Vehicles
WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.
Tools:
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.
Electrical Cords
WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.