Top Categories
All Categories

Top Categories

All Categories

Shop By Vehicle
Account Login
Gift Cards
Track Order
RAM Clutches 88952HDT

RAM Clutches HDX Clutch Kit 2005-10 Ford Mustang 4.6L (6-Bolt Flywheel)


Free Shipping Ships directly from the manufacturer on 09/24/19
Save $20 Off $250, $50 Off $500, $100 Off $1,000, $150 Off $2,000. Promo Code: SAVEMORE exclusions apply

RAM Clutches HDX Clutch Kit 2005-10 Ford Mustang 4.6L (6-Bolt Flywheel) $319.00
Out of stock
HDX Clutch Kit
  • 2005-10 Ford Mustang 4.6L (6-Bolt Flywheel)
  • 11" Diameter
  • 1-1/8" x 26-Spline
  • RAM Clutches 88952HDT Details


  • Built With 30 Percent More Clamp Pressure Than Stock
  • Smooth; Chatter Free Operation
  • Premium Organic Composite Disc Friction Material
  • Exclusive 8-Spring Hub Assembly Where Applicable
  • Great Drivability
  • Use For Power Levels To 450 HP
  • Incl. Pressure Plate/Disc/Release Bearing/Alignment Tool

  • Specifications:

    Mounting Hardware Included
    Flywheel Included
    Pressure Plate Style
    Disc Material
    Disc Diameter (in.)
    Alignment Tool Included
    Pilot Bushing Included
    Throwout Bearing Included
    Disc Style
    Sprung Hub
    Throwout Bearing Style
    Counterweight Assist
    Disc Diameter (mm)
    Input Spline Quantity
    Sold as a kit
    Input Shaft Diameter (in.)
    Manufacturer's Part Number:

    RAM Clutch Systems for Ford performance cars offer several alternatives for the proper blend of performance and drivability for your application.

    Premium OEM Replacement Clutches
    Not intended for performance/competition, RAM Premium OEM Replacement Clutches offer the best blend of drivability and durability. They utilize the same original equipment as vehicle manufacturers so you get what belongs in the car, not cheap components or imported imitations. Pressure plate, disc, alignment tool, and bearing included unless otherwise noted.

    HDX Clutches
    Looking for the perfect next-step upgrade for your clutch system? HDX Clutch sets offer a nice increase in holding power up to 450 ft/lbs while retaining an organic friction material for chatter-free engagement. If you are doing a restoration or just need a little better clutch system than stock, HDX sets get the job done.

    Powergrip and Powergrip HD Clutches
    For the ultimate in single-disc clutch sets, Powergrip clutches provide increased clamp loads and holding power without significant changes in drivability. Powergrip Sets utilize dual-sided 900/300 series facing materials for a blend of drivability and holding power up to 550 ft/lbs. For applications up to 650 ft/lbs, Powergrip HD adds a full 900 Series Disc that should only be used on a billet steel or aluminum flywheel. You may experience some chatter at low RPM with Powergrip HD clutches in vehicles with higher (lower numerically) rear gearing. For best performance and safety, match up your Powergrip Set with a RAM billet steel or aluminum flywheel.

    Force 9.5 and Force 10.5 Dual-Disc Clutch Systems
    A dual-disc clutch is not just for high-horsepower applications. The beauty of a dual disc is that you get great holding power with smooth engagement and lower pedal effort. RAM's Force 9.5 is the ideal entry level dual-disc clutch for street use. With a torque capacity of roughly 800 ft/lbs and moderate clamp pressure, these clutches handle small blower or turbo applications and provide a light pedal effort similar to the stock clutch (RAM test drivers couldn't tell the stock clutch was changed). The floater plate is driven from 3 sets of straps to eliminate rattle at idle; the top clutch disc has a sprung hub assembly to absorb the clutch's initial engagement and reduce chatter.

    Based on the original RAM Street Dual design, the Force 10.5 is more street-friendly with a 3-strap system to locate the floater plate and stop the floater plate rattle that's common to stand-driven dual disc clutches. A high clamp load pressure plate ensures enough holding power to manage about 1100 ft/lbs of torque without excessive pedal pressure. There are two disc series: 300 and 900. The steel-faced 300 Series offers smooth engagement & long service life. The metallic-faced 900 Series is for torque load to about 1300 ft/lbs so expect some floater plate noise at idle. Ideal for larger blower or turbo setups, Force 10.5 Clutches handle more torque & weigh slightly more than their smaller counterparts. This greater inertia translates into better low-speed drivability for heavier vehicles or those with large camshaft profiles. Additionally, starting with a RAM dual-disc clutch will prevent continuous clutch upgrades as you modify your vehicle. Includes RAM billet flywheel.

    RTrack 10.5 Dual-Disc Clutch Systems
    The RTrack Dual is modeled after RAM's highly successful drag racing clutches used in Pro Stock and Pro Mod vehicles. The major difference between these clutches and the Force 10.5 is the floater drive system. RTrack employs a stand-driven floater plate to provide greater torque capacity and negative load for vehicles that see a lot of track time. A 2,400-pound clamp load pressure plate produces good holding power without excessive pedal effort. There are two disc series: 300 and 900. The 300 Series has a sprung hub top disc and solid hub bottom disc for smooth engagement. The 900 Series is for higher torque load up to about 1300 ft/lbs so expect some floater plate noise at idle. Includes RAM billet flywheel.

    Click here for Mustang Clutch System Guide

    Does RAM Clutches 88952HDT fit your vehicle?

    Narrow Results
    Filter By Year
    Filter By SubModel
    Filter By EngineType
    Filter By Liter
    Filter By Aspiration

    2007-2008  FORD MUSTANG

    • EngineType: ALL
    • SubModel: SHELBY GT

    2005  FORD MUSTANG

    • EngineType: ALL
    • SubModel: SALEEN

    2005-2009  FORD MUSTANG

    • EngineType: ALL
    • SubModel: GT

    2008-2009  FORD MUSTANG

    • EngineType: ALL
    • SubModel: BULLITT

    2010  FORD MUSTANG

    • Liter: 4.6
    • Aspiration: N
    • SubModel: GT
    • Engine Vin: H
    • CUI: 281
    • EngineType: V8 ( 4.6 L / 281 )
    Some parts are not legal for use in California or other states with similar laws / regulations

    Motor Vehicles

    WARNING: Motor vehicles contain fuel, oils and fluids, battery posts, terminals and related accessories which contain lead and lead compounds and other chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. These chemicals are found in vehicles, vehicle parts and accessories, both new and as replacements. When being serviced, these vehicles generate used oil, waste fluids, grease, fumes and particulates, all known to the State of California to cause cancer, birth defects, and reproductive harm.


    WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically treated lumber. Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

    Electrical Cords

    WARNING: The wires of these products contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.